Loading ...
Loading ...
Loading ...
parking brake released, ensure that position P of
the automatic transmission is engaged.
Secure the vehicle in a manner appropriate to
the inclination of the road, e.g., with a wheel
chock; otherwise, there is the danger of the ve‐
hicle rolling.◀
Unlocking
1. Remove the release tool from the onboard
vehicle tool kit.
2. Raise the cargo floor panel in the cargo area.
3. Take out the floor trim in the cargo area, re‐
moving the screws with the release tool, ar‐
rows.
4. Place the release tool on the release point,
arrow.
5. Forcefully pull the release tool up against the
resistance until you notice a marked in‐
crease in the resistance and the parking
brake releases audibly.
Have the malfunction corrected
If the parking brake has been released
manually in response to a malfunction, only
technicians can return it to operation.
Have the malfunction corrected by your service
center.◀
After a power failure
Only put the parking brake into operation
after a power failure
The parking brake should only be put into oper‐
ation again if it was manually released due to an
interruption in the supply of electrical power.
Otherwise, it cannot be ensured that the parking
brake will function properly.◀
Seite 71
Driving Controls
71
Online Edition for Part no. 01 40 2 916 693 - X/12
Loading ...
Loading ...
Loading ...