Loading ...
Loading ...
Loading ...
1 Remove the remote control
cover.
2 Insert batteries in the compart-
ment, making sure the ± and
— polarities are correctly
aligned.
» The display indicates "AM
6:00" when batteries are prop-
erly installed.
3 Reinstall the cover.
E-4
NOTES:
» The battery life is approximately one year in normal use.
» When you replace the batteries, always change both batteries, and make sure
they are the same type.
» If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
» If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards the
unit’s signal receiver window and
press the desired button. The unit
generates a beep when it receives the
signal.
» Make sure there is no curtain or other
object between the remote control and
the unit.
» The remote control can send signals
from up to 7 metres away.
Remote control
cover
USING THE REMOTE CONTROL
INSTALLING BATTERIES Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
NOTE:
If two indoor units are installed in the same room, both units may operate at the same
time by the remote control signal. The units should be installed apart from the other as
much as possible. Transmit the signal directly toward the unit you wish to operate.
+
-
+
-
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...