Loading ...
Loading ...
Loading ...
About the controls on the refrigerator.
9 IS COLDEST
0 IS OFF
5
8
9
4
3
2
1
0
6
7
5
8
9
4
3
2
1
6
7
Your controls will look like one of the following:
Startup Steps for Proper Temperature Control
STEP 1—Set Fresh Food Control on “5.”
STEP 2—Set Freezer Control on “5.”
STEP 3—WAIT
12
HOURS for temperature to stabilize.
STEP 4—If a change is needed, move the control one number at a time
and allow
12
hours for temperature to stabilize.
NOTE:
Turning the refrigerator to the
0
(off)
setting via the controls does
not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage
and operating conditions and may require more than one adjustment.
0 IS OFF
9 IS COLDEST
FREEZER
REFRIGERATOR
To Change Temperature Control Setting with Touch Pads:
• Freezer setting is on the left side of the display.
• Refrigerator setting is on the right side of the display.
— Press the
Warmer
or
Colder
pad for compartment and
direction desired.
— Present control setting number will illuminate.
— Each time the pad is touched, compartment setting
changes one number.
A display of 1 is warmest and 9 is the coldest setting.
To Turn Cooling Off:
To stop cooling in the refrigerator
and
freezer compartments, first
repeatedly press the
Warmer
pad for the freezer until its display
continuously
flashes
“1”. Then, using the refrigerator control, repeatedly
press
Warmer
until both displays flash “0”. “0” in both displays turns off
the cooling system. On some models, it may be necessary to set only one
control to
0
to turn off cooling in both compartments.
NOTE:
Turning the refrigerator to the
0
(off)
setting via the controls does
not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage
and operating conditions and may require more than one adjustment.
The temperature controls are preset in the factory at
37°F
for the
refrigerator compartment and
0°F
for the freezer compartment.
Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
The temperature controls can display both the
SET
temperature as well
as the actual temperature in the refrigerator and freezer. The actual
temperature may vary slightly from the
SET
temperature based on usage
and operating environment.
Setting either or both controls to
OFF
stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE:
The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
9 IS COLDEST
0 IS OFF
FREEZER FRESH FOOD
5
8
9
4
3
2
1
0
6
7
5
8
9
4
3
2
1
6
7
6
Loading ...
Loading ...
Loading ...