Loading ...
Loading ...
Loading ...
Page 12 of 24 802698 - G4 User Guide - 09.16 - v2.02
Caution
must be observed when changing any settings within the
Service Menu as any changes may affect the normal operation of
the unit. This can only be done by a Zip technician. Please contact
your Zip service provider for further assistance.
1.
Press the [MENU] button for main
menu.
2.
Press the [Service] button.
3.
A password is required to enter
service menu.
G4 HydroTap Service Screen
NOTE: In Australia call a licensed electrician, plumber,or Zip office on
1800-638-633, for assistance, service, spare parts, or enquiries.
D
Service
LCD Screen operation - Section D
E Security
The Zip HydroTap G4 allows the appliance coordinator to set up a password
to protect against users changing the preferred system settings.
To set a password
1.
Press the [MENU] button for main
menu.
2.
Press the [Security] button.
3.
Press [Change Password}
4.
Enter a 4 digit password
5 - Lux (light level) Sensor Calibration (All)
1. Press [MENU] button for main
menu.
2. Press [Install] button.
3. Press [Lux Sensor Calibration]
button.
4. The lights on the Tap head will flash
to confirm calibration.
5. Check for correct tap operation
by selecting ‘Lux Sensor-> OFF’.
When the room is darkened (below
the calibrated light level), the
tap lights will turn OFF after 24
seconds.
LCD Screen operation - Section E
Loading ...
Loading ...
Loading ...