1. Home
  2. Cuisinart
  3. Cuisinart CHW-14 User Manual
  4. Page 7

User Manual - Page 7

For CHW-14.

Loading ...
Loading ...
Loading ...
7
ENJOY THE 2-IN-1 COFFEE PLUS
®
Your Coffee PLUS
®
system is designed to
let you use the Coffeemaker and Hot Water
System separately, or at the same time.
Perfect for every occasion.
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the Coffeemaker is plugged in,
12:00 will appear.
Turn the Function knob to CLOCK
Hold down the Hour or Minute button until the
clock begins flashing. Press either button to
select the desired time. Hold buttons down to
scroll through the digits, or press and release to
advance one digit at a time. When scrolling, the
numbers will advance slowly and then speed
up. When the number displayed approaches
the desired time, press and release to advance
one digit at a time. Be sure the PM indicator is
on if a PM time is desired.
To finish setting the clock, turn the Function
knob to any other setting or simply wait until
the numbers stop blinking.
SETTING THE AUTO ON TIME
When you turn the Function knob to PROG,
it displays a previously selected Auto On time,
or the default time (12:00pm).
1.
Turn the Function knob to PROG
Use the Hour and Minute buttons as above
to program your start-brew time.
2. Turn the Function knob to AUTO ON
LCD will display the current time.
3.
Press and release On/Off button
A blue light indicates that the Coffeemaker is
in AUTO ON mode. The blue light around On/Off
will come on when brew cycle begins.
Both lights will turn off when the Keep Warm
cycle ends.
NOTE: To start brew time at the same time
the next day, simply make sure the Function knob is
on AUTO ON and press and release On/Off button
once more. The blue Auto On light will turn on.
SETTING THE READY TONE OPTION
Turn dial to ON and unit will alert you with 5 beeps
when coffee has finished brewing. Turn to OFF to
silence the tone.
BEFORE FIRST USE
We recommend flushing out both the
Coffeemaker and Hot Water System before
first use.
Coffeemaker: Fill the reservoir with cold
water and follow the directions for Brewing
Coffee. DO NOT ADD COFFEE!
Hot Water System: Fill the reservoir to the
Max fill line and follow directions for Using
the Hot Water System.
Once the system flush is complete, your
Coffee PLUS
®
system is ready to brew and
heat water so you can enjoy Cuisinart at
its best!
CHARCOAL WATER FILTER
Your Coffeemaker comes with two charcoal
water filters that eliminates chlorine, bad tastes
and odors from tap water.
Inserting the Water Filter
•Removethefiltersfromthepolybagand
soak them, fully immersed, in cold tap water
for 15 minutes.
•Liftthewaterfilterholderoutofthewater
reservoirs from both the Coffeemaker side and
Hot Water System side (see diagram, page 5).
•Pressdownonthefiltercompartmentandpull
toward you to open.
•Placefilterintotheholderandsnap
it closed. Be careful – improper placement can
tear the filter skin.
•Flushfilterbyrunningcoldtapwaterthrough
holes in bottom of compartment for 10
seconds.
•Allowthefiltertodraincompletely.
•Slidethewaterfilterholderbackintothe
channel in the water reservoir, pushing it
down to the base of the unit.
NOTE: We recommend changing
the water filter every 60 days
or after 60 uses, and more often
if you have hard water.
Replacement filters can be
purchased in stores, by calling
Cuisinart Customer Service,
or at www.cuisinart.com.
Hot Water Charcoal
Water Filter
Coffeemaker Charcoal
Water Filter
Loading ...
Loading ...
Loading ...