Loading ...
Loading ...
Loading ...
The appliance has been manufactured as a class I appliance, therefore
earth cable is necessary.
The connection to the mains is carried out as follows:
• The minimum distance between the support surfaces of the cooking pots on
the stove top and the bottom of the cooker hood must be at least 26 inches. If
a connection tube composed of two parts is used, the
upper part must be placed outside the lower part. Do not connect the cooker
hood exhaust to the same conductor used to circulate hot air or for
evacuating fumes from other appliances generated by other than an electrical
source. Before proceeding with the assembly operations, remove the
anti-grease filter(s) (Fig.12) so that the unit is easier to handle. If the
cooker hood will vent the air to the outside of the building, prepare
the hole for evacuation of
the air.
• Hood assembly
Remove the structure from the packaging and separate the upper and lower parts.
IEC227 North America
L=live Brown Black
N=neutral Blue White
E=earth Green/Yellow Green
If not provided, connect a plug for the electrical load indicated on the
description label. Where a plug is provided,
the cooker hood must be installed in order for the plug to be easily
accessible. An omni-polar switch with a minimum opening of 3mm
between contacts, in line with the electrical load and local standards, must
be placed between the appliance and the network in the case of
direct connection to the electrical network.
Loading ...
Loading ...
Loading ...