Loading ...
Loading ...
Loading ...
Island Canopy Installation Operation Manual
- 11 -
Troubleshooting
Fault Cause Solution
Light on, but
motor does not
work
The leaf blocked Get rid of the blocking
The capacitor damaged Replace capacitor
The motor jammed bearing damaged Replace motor
The internal with of motor off or a bad
smell from the motor
Replace motor
Light does not
work, motor does
not work
Beside the above mentioned, check the following:
Light damaged Replace lights
Power cord looses Connect the wires as per
the electric diagram
Oil leakage
One way valve and the air ventilation
entrance are not tightly sealed
Take down the one way
valve and seal with glue
Leakage from the connection of U-
shaped section and cover
Take U-shaped section
down and seal with soap
or paint
Shake of the
body
The leaf damaged and causes
shaking
Replace the leaf
The motor is not tightly hanged Lock the motor tightly
The body is not tightly hanged Fixed the body tightly
Insufficient suction The distance between the body and
the gas top too long
Readjust the distance
Too much ventilation from open doors
or windows
Choose a new place
and resemble the
machine
The machine
inclines
The fixing screw not tight enough Tighten the hanging
screw and make it
horizontal
The hanging screw not tight enough Tighten the hanging
screw and make it
horizontal