Loading ...
Loading ...
Loading ...
7
INSTALLATION
Unit Setup
1. Remove the water tank and take out the exhaust hose.
2. Remove the outlet grille and install the exhaust tube by
rotating it clockwise onto the rear air outlet. Please
ensure it is fully inserted before use. To remove the
exhaust hose, please rotate in an anti-clockwise
direction.
Locating the unit.
Install the portable air conditioner in a flat location
with adequate space to ensure the air inlets and
outlets will not be blocked.
Keep a minimum clearance of 50cm from walls and
other objects. Position the unit to allow the exhaust
hose to reach a suitable window, as shown.
Avoid sharp bends or kinks in the exhaust hose.
The optional adjustable window slider is included to
ensure the exhaust hose is held in place (in the
window) and prevents expelled hot air re-entering the
room.
The appliance should not be used in damp areas
such as a laundry or bathroom.
Do not place the unit where it will be in direct sunlight as it may overheat and turn off.
Loading ...
Loading ...
Loading ...