User Manual LG 55UN7000PUB UHD 70 Series 55 inch 4K HDR Smart LED TV

LG 55UN7000PUB UHD 70 Series 55 inch 4K HDR Smart LED TV - Use Manual - Use Guide PDF.
Documents: Go to download!
  • Owner's manual - (English)



User manual Television for

Preparing

•  When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

•  Image shown may differ from your TV.

•  Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

•  The available menus and options may differ from the input source or product model that you are using.

•  New features may beadded to thisTV in the future.

•  The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on /off button, turning off the device and unplugging the power cord.

•  The items supplied with your product may vary depending upon the model.

•  Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

•  Usean extension cablethat supports USB 2.0if the USB cableor USB flash drivedoes not fit into your TV’s USB port.

•  Use acertified cable with the HDMI logo attached. If you do not use acertified HDMI cable, the screen may not display or a connection error may occur.

•  Recommended HDMI cable types (3 m (9.84 feet) or less)

- Ultra High Speed HDMI cable®/™

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models.

The model name or design may be changed due to the manufacturer’s circumstances or policies.

Magic Remote Control

(Dependingupon model)

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

Wall Mounting Bracket

(Dependingupon model)

Make sure to uses crews and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Lifting and moving the TV

When moving or lifting theTV, read the following to prevent theTV from being scratched or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move theTV in the box or packing material that theTV originally camein.

•  Before moving or lifting theTV, disconnect the power cord and all cables.

•  When holding theTV, the screen should face away from you to avoid damage.

•  Hold the to pand bottom of theTV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

•  Use at least two peopleto move a largeTV.

•  When transporting theTV by hand, hold theTV as shown in the following illustration.

•  When transporting theTV, do not exposetheTV to jolts or excessive vibration.

•  When transporting theTV, keep theTV upright; never turn theTV on its side or tilt towards the left or right.

•  When handling theTV, becareful not to damage the protruding buttons.

•  Avoid touching the screen at all times, as this may result in damage to the screen.

•  Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damaget othe screen.

•  When attaching the stand to theTV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt theTV into its upright position on a table.

•  Leavea minimum of 10cm (4 inches) space from the wall for proper ventilation.

(Dependingupon model)

2 Connect thepower cordtoa walloutlet.

•  Do not apply foreign substances (oils, lubricants,etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

•  If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

•  Do not use any unapproved items to ensure the safety and product lifes pan.

•  Any damage or injuries caused by using unapproved items are not covered by the warranty.

•  Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

•  Do not fasten the screws with excessive force otherwise they may strip and become loose

Securing TV to the Wall

1 Insert and tighten the eye-bolts, orTV brackets and bolts on the back of theTV.

•  If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-boltson the rear of theTV.

3 Connect the eye-bolt sand wall brackets tightly with asturdy rope. Make sure to keep the rope horizontal with the flat surface.

•  Use a platform or cabinet that is strong and large enough to support the TV securely.

•  Brackets, bolts and ropes are not provided.You can obtain additional accessories from your localdealer

Mounting to the Wall

An optional wall mount can beused with your LG Television.Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model.Carefully attach the wall mount bracket at the rear of theTV. Install the wall mount bracket on asolid wallper pendicular to the floor. If you are attaching theTV toother building materials,please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount.The LG wall mount is easy to adjust or to connect the cables.When you do not use LG’s wall mount bracket,use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount,attach the mount tothe wall. Attach the cables to theTV first, then attach theTV to the mount.

•  RemovethestandbeforeinstallingtheTV on a wall mount by performing the stand attachment in reverse.

•  For more information of screws and wall mount bracket, refer to the Separate purchase.

•  If you in tend to mount the product to a wall, attach VESA standard mounting interface (optionalparts) to the back of the product.When you install the set to use the wall mounting bracket (optional parts), fixit carefully so as not to drop.

•  When mounting a TV on the wall, makesure not to install theTV by hanging the power and signal cables on the back of theTV.

•  Do not install this product on a wall if it could be exposed to oil or oil mist.This may damage the product and cause it to fall. ENGLISH_Index 8

•  When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the in flux of dust and insects, (Depending upon model).

Connections

You can connect various external devices to theTV. For more information on external device’s connection, refer tothe manual provided with each device.

Antenna/Cable

Connect an antenna, cable,or cable box to watch TV while referring to the following.The illustrations may differ from the actual items and an RFcable is optional.

•  Make sure not to bend the copper wire of the RF cable.

•  Complete all connections between devices,and then connect the power cord to the power outlet to prevent damage to your TV.

•  Use a signal splitter to use 2 TVs or more.

•  DTV Audio Supported Codec: MPEG, Dolby Digital

•  This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because there lated standards have not been confirmed.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and theTV with the HDMI cable

HDMI

•  When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

•  HDMI Audio Supported Format: (Depending upon model) True HD (48 kHz), Dolby Digital / Dolby DigitalPlus (32 kHz /44.1 kHz /48 kHz), PCM (32 kHz /44.1 kHz /48 kHz /96 kHz /192 kHz)

•  -> [Picture] -> [Additional Settings] -> [HDMI Ultra HD Deep Color]

(Except for UN85*,82UN80*)

- On: Support 4K @ 50/60 Hz (4:4:4,4:2:2,4:2:0)

- Off: Support 4K @ 50/60 Hz (4:2:0) (Only UN85*,82UN80*)

- On: Support 4K @ 50/60 Hz (4:4:4,4:2:2,4:2:0), 4K @ 100/120 Hz (4:4:4,4:2:2,4:2:0)

- Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Portal so supports Ultra HD Deep Color,your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Color] setting to off.

- This feature is available only on certain models which support HDMI Ultra HD Deep Color

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices,PC,gaming devices, and other external devices. For more information on external device’s connection, refer tothe manual provided with each device.

•  If you record a TV program on a Blu-ray/ DVD recorder or VCR, make sure to connect theTV signal input cable to theTV through a DVD recorderor VCR. For more information about recording, refer tothe manual provided with the connected device.

•  The external device connections shown maydiffer slightly from illustrations in a manual.

•  Connect external devices totheTV regardless about the order of theTV port.

•  IfyouconnectagamingdevicetotheTV,usethecablesupplied with thegamingdevice.

•  Refer totheexternalequipment’s manual foroperating instructions.

•  In PC mode, there may be noise associated with there solution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change there fresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the pictureis clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

•  Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on theTV.

•  When connecting via a wired LAN, it is recommended to use aCAT 7 cable.

•  The TV may be capable of operating without a set-top-box from a multi channel video programming distributor (MVPD).

Remote RS-232C setup

To obtain the RS-232 C external control set up information, please visit www.lg.com. Download and read the manual, (Depending upon model).

•  Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

•  When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Using Button

You can simply operate theTV functions, using the button.

Basic functions

1 All runningapps will close.

2 You can access and adjust the menu by pressing the button when TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

When theTV is turned on, press the button one time. You can adjust the Menu items using the button.

Using Magic Remote Control

(Depending upon model) The descriptions in this manual are based on the buttons on there mote control. Please read this manual carefully and use the TV correctly.

When the message [Magic remote battery is low. Please change the battery.] is displayed, replace the batteries.

To install batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.This remote uses infrared light. When in use, it should be pointed in the direction of theTV’s remote sensor.

(Some buttons and services may not be provided depending upon models or regions.)

** To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or off.

(STB POWER) You can turn your set-top box on or off by adding the set-top box to the universal remote control for your TV.

Number buttons Enters numbers.

Accesses the [Quick Help].

(DASH) Inserts a between numbers such as 2-1 and 2-2.

Accesses thesavedchannels list.

(MORE ACTIONS) Displays more remote control functions.

QUICK ACCESS** Edits QUICK ACCESS.

- QUICK ACCESS is a feature that allows you to enter a specified app or Live TV directly by pressing and holding the number buttons.

AD/SAP** (Secondary Audio Program) Feature can also be enabled by pressing the button.

Adjusts the volume level.

(MUTE) Mutes all sounds.

(MUTE) Accesses the [Accessibility] menu.

Scrolls through the saved channels.

(Voice recognition) Network connection is required to use the voice recognition function.

Check for recommended content. (Some recommended services may not be available in some countries.)

(Voice recognition) Speak while pressing and holding the button to use the voice recognition feature.

(HOME) Accesses the Home menu.

(HOME) Shows the previous history.

(Q. Settings) Accesses the Quick Settings.

(Q. Settings) Displays the [All Settings] menu.

Wheel (OK) Press the center of the Wheel button to select a menu.You can change channels by using the wheel button.

(up/down/left/right) Press the up,down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.

(BACK) Returns to the previous screen.

(BACK) Clears on-screen displays and returns to last input viewing.

Displays the program event according to time scheduler.

Streaming Service buttons Connects tothe Video Streaming Service.

(INPUT) Changes the input source.

(INPUT) Accesses the [Home Dashboard]. , , ,

These access special functions in some menus. ,

(Control buttons) Controls media contents.

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with yourTV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK)on the remote control.

* If theTV fails to register the Magic Remote, try again after turning theTV off and back on.

How to deregister the Magic Remote Control

Press the (BACK) and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with yourTV.

* Pressand hold the button for more than 5 seconds to disconnect and re-register the Magic Remoteat the same time.

•  Do not mix new batteries with old batteries.This may cause the batteries to over hea tand leak.

•  Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury,or ambient pollution.

•  This apparatus usesbatteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposalor recycling information.

•  Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in the product.

•  To open the USER GUIDE ->[Support] -> [User Guide]

Troubleshooting

Cannot control theTV with the remote control.

•  Check if anything such as tape has been placed over the receiver.

•  Check if there is any obstacle between the product and the remote control.

•  Replace the batteries with new fresh ones. No image display and no sound is produced.

•  Check if theproduct is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly.

•  Check the power control settings.The power supply may be interrupted.

•  Check if the auto-off function is activated in the settings menu.

•  If there is no signal while theTV is on, theTV will turn off automatically after 15 minutes of inactivity.

Abnormal Display

•  If the TV feels cold to the touch, there may be a small flicker when it is turned on.This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red,green,or blue spots. However, they have no adverse effect on theTV’s performance. Avoidt ouching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on thescreen.

•  This panel is an advanced product that contains millions of pixels. In avery few cases, you could see fine dots on the screen while you’re viewing theTV. Those dots are deactivated pixels and do not affect theperformance and reliability of theTV.

•  Displaying as till image for aprolonged periodof time may cause an image sticking. Avoid displaying a fixed image on theTV screen for a extended length of time.

Generated Sound

•  Cracking noise A cracking noise that occurs when watching or turning off theTV is generated by plastic thermal contraction due to temperature and humidity.This noise is common for products where thermal deformation is required.

•  Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product

•  When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel, (Depending upon model).

•  Make sure to wring any excess water or cleaner from the cloth.

•  Do not spray water or cleaner directly on to the TV screen.

•  Make sure to spray just enough of water or cleaner on to a dry cloth to wipethe screen.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).

The actual energy consumption depends on the usage environment (The content watched,TV settings,etc.).

•  For information of the power supply and power consumption, refer to the label attached to the product.

- The typical power consumption is measured in accordance with IEC62087 or each country’s energy regulations.

*  On some models, the label is inside the external device connection terminal cover.

*  Depending upon the model or country, the typical power consumption may not be on label.

.



See other models: 43UN7300PUF 50UN7300PUF 55UN7300PUF 75UN8570PUC 82UN8570PUC

LG Electronics 55UN7000PUB | Series: 70 Series | File type: PDF | Filename: LG UHD 70 Series 55 inch 4K HDR Smart LED TV 55UN7000PUB.pdf | Size: 6.59 MB | Language: English

Download User Manual

Product Infomation and Reviews - 55UN7000PUB photo

55UN7000PUB Photo

LG Electronics in United States

(800) 243-0000 Consumer (7am-midnight CST) (888) 865-3026 Commercial (8am-6pm CST)

LG Electronics 55UN7000PUB Questions and Answers

Find answers or Ask a question.
  • Total questions: 2
  • Questions unAnswered : 1

#1 Will this fit on a stand that is 44” wide?
The stand width on this TV is 44.4".