Loading ...
Loading ...
Loading ...
Features and functions
32
EJU31180
Start switch
Push the start switch (green button) to start
the engine.
NOTE:
The engine will not start when the clip is re-
moved from the engine shut-off switch or if the
throttle lever is squeezed.
EJU31210
Throttle lever
Squeeze the throttle lever to increase engine
speed.
Release the throttle lever to decrease engine
speed or to return it to the idle position.
EJU31240
Cooling water pilot outlets
This watercraft is equipped with cooling water
pilot outlets.
When the engine is running, cooling water is
circulated in the engine, and then it is dis-
charged from the pilot outlets.
To check for proper operation of the cooling
system, check that water is being discharged
from the port (left) pilot outlet. If water is not
being discharged from this outlet, cooling wa-
ter may not be circulating in the engine. When
this occurs, stop the engine and check for the
cause. (See pages 42 and 91 for more infor-
mation.)
NOTE:
● If the cooling water passages are dry, it will
take about 60 seconds for the water to
reach the outlet after the engine is started.
● Water discharge may not be constant at
idle, therefore, open the throttle a little to
check that water discharges properly.
● Water discharge may not be constant at the
starboard (right) pilot outlet, however, if it is
constant at the port (left) pilot outlet, the
cooling system is operating normally.
1 Start switch
1 Throttle lever
UF1Y11E0.book Page 32 Wednesday, August 23, 2006 11:43 AM
Loading ...
Loading ...
Loading ...