Loading ...
Loading ...
Loading ...
4-14
E
N
O
TE:
@
● Wipe off any water on the spark plug or
inside the cap before installing the spark
plug cap. Push the spark plug cap down
until it clicks.
● If a torque wrench is not available when
you are fitting a new spark plug, a good
estimate of the correct torque with a new
gasket is a quarter turn to a half turn past
finger tight. Have the spark plug adjusted
to the correct torque with a torque wrench
as soon as possible.
@
WARNING
@
Be careful not to damage the insulator
when removing or installing a spark plug.
A damaged insulator could allow sparks
to escape, which could lead to explosion
or fire.
@
EJU00553
Lubrication points
To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
● Throttle cable (carburetor end)
● Choke cable (carburetor end)
● Throttle cable (handlebar end)
Pull the throttle lever and remove the seal
1
.
Spray a rust inhibitor into the outer cable. Refit
the seal securely.
Recommended water-resistant grease:
Yamaha Marine Grease/
Yamaha Grease A
E_GM6-16-4.fm Page 14 Tuesday, July 11, 2000 8:58 AM
Loading ...
Loading ...
Loading ...