Loading ...
Loading ...
Loading ...
FLOWSENSE
indicator light is on
during the drying
cycle
• Ductworkistoolongorhas
too many turns/restrictions.
• Signicantblockageofthe
ductwork due to lint buildup
or debris.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
BEFORE CALLING FOR SERVICE (cont.)
Problem Possible Causes Solutions
Steamdoesn’t
generate but no error
code is shown.
• Waterlevelerror.
• Unplugdryerandcallforservice.
Garments still
wrinkled after
STEAMFRESH
™
.
• Toomanyortoodifferent
types of garments in dryer.
• Smallloadsof1to5itemsworkbest.
• Loadfewergarments.Loadsimilar-typegarments.
There are no creases
left on garment after
STEAMFRESH
™
.
• Thefunctionofthiscycle
is to remove wrinkles from
fabric.
• Useanirontomakecreases.
Garments have
static after REDUCE
STATIC.
• Thisisnormal.
• Dependsonindividualmoisturelevelinskin.
Garments are too
damp or too dry after
REDUCESTATIC.
• Correctdryingoptionsnot
selected.
• Selectloadweightmanuallybeforestarting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASYIRON.
• Thisisnormal.
• Dependsontheamountortypeofgarments.
Water drips from door
duringSteamCycle.
• Thisisnormal.
• Thisissteamcondensationondoorsurface.
Steamisnotvisible
duringSteamCycle.
• Thisisnormal.
• Steamvaporisdifculttoseewhenthedooris
closed.
Drum does not turn
duringSteamCycle.
• Thisisnormal.
• The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• Thisisnormal.
• Steam is released at different stages of the cycle
for each option.
• MORETIMEbuttonpressed.
Odors remain in
clothing after
STEAMFRESH
™
.
• STEAMFRESH
™
did not
remove odor completely.
• Fabricscontainingstrongodorsshouldbe
washed in a normal cycle.
The display shows
.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
38
Loading ...
Loading ...
Loading ...