Loading ...
Loading ...
Loading ...
Servicing Your Honda 91
Wheels
Removal
1. Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
2.
Loosen the rear axle nut (1) while holding
the rear axle shaft (2).
3. Turn both chain adjusters (3) so the rear
wheel can be moved all the way forward for
maximum drive chain slack.
4.
Remove the rear axle nut. Push the wheel
forward and derail the drive chain from the
driven sprocket.
5.
Remove the rear axle, chain adjusters, rear
wheel and side collars.
Avoid depressing the brake pedal when the
wheel is off the motorcycle. This will force
the caliper piston out of the cylinder. The
result will be a loss of brake fluid. If this
occurs, the brake system will require service.
See your dealer for this service.
Avoid getting grease, oil, or dirt on the disc
or pad surfaces. Any contamination can
cause poor brake performance or pad wear
after reassembly.
Rear Wheel Removal
RIGHT REAR
(1) rear axle nut
(2) rear axle shaft
LEFT REAR
(3) chain adjusters
(3) (1)(1)
(3) (2)
Loading ...
Loading ...
Loading ...