Loading ...
Loading ...
Loading ...
Use
53
EN
Manual ignition:
1. Open the oven door completely.
2. Press and turn the temperature knob
anticlockwise to between the MIN and
MAX settings.
3. Insert a lit match inside the flame pipe A
on the oven base.
4. Check that ignition has occurred.
5. After lighting, keep the knob pressed in
for a few seconds to allow the
thermocouple to heat up.
Checking the power supply
Before manually lighting the gas oven
burner, you must check that the power
supply is present.
After connecting the appliance to the mains
power supply, perform one of the following
methods:
• Turn the timer knob to the lamp position
to switch on the oven light.
OR
1. Lift the lid.
2. Open the oven door completely.
3. Press and turn the gas oven knob
anticlockwise to a position between MIN
and MAX.
4. Check that air comes out of the slots on
the rear of the hob.
Before performing manual ignition,
you must check the power supply
(see section “Checking the power
supply”).
In case of accidental extinguishing,
turn the knob to the off position and
do not try to light the burner again
for at least 60 seconds.
Loading ...
Loading ...
Loading ...