Loading ...
Loading ...
3
RQTN0174
Troubleshooting
General
Sound is distorted or no sound.
• Adjust the volume.
• Check and adjust the antenna.
• Move the unit to another location and do a full scan
again.
• An AC mains lead or fluorescent light is near the
cables. Keep other appliances and cords away from
the cables of this unit.
Reception is poor or beat sound is heard.
• Keep the antenna away from computers, TVs, other
cables and cords. Move mobile telephones away
from the unit if the interference is apparent.
Messages
“Service not available”
• No DAB reception.
“No DAB station”
• No DAB station available.
• Check the antenna.
• Move the unit to another location and do a full scan
again.
“Time Not saved”
• The changes made to the time was not saved, the
changes will be lost.
“Alarm Not saved”
• The changes made to the alarm was not saved, the
changes will be lost.
Specifications
Power supply
AC AC 230 V to 240 V, 50 Hz
Battery DC 6 V (4 x R14/LR14, C)
Power consumption 7 W
Frequency range
FM 87.50 MHz to 108.00 MHz (50 kHz steps)
DAB/DAB+ BAND III
5A to 13F (174.928 MHz to 239.200 MHz)
Terminal
Headphones Stereo, 3.5 mm jack (16 Ω)
Speaker
Full range 10 cm (4 Ω)
Output power 2 W (RMS 10% THD)
Battery life
Dimensions (W x H x D) 251 mm x 138 mm x 91 mm
Mass
With batteries 1.3 kg
Without batteries 1.0 kg
Operating temperature range 0°C to +40°C
Operating humidity range
35% to 80% RH (no condensation)
Note:
Specifications are subject to change without notice. Mass
and dimensions are approximate.
Power
source
Manganese
R14 battery
Alkaline
LR14 battery
FM Approx. 9 H Approx. 30 H
DAB/DAB+ Approx. 12 H Approx. 40 H
Power consumption in standby mode
0.6 W (approximate)
rf-d10gn.book Page 3 Friday, January 3, 2014 5:01 PM
printing
Loading ...
Loading ...
Loading ...