Home
Bookmarks
Home
Neff
Neff D87E21N1GB/03 User Manual
Neff D87E21N1GB/03 Extra wide chimney hood Stainless steel with glass canopy sides
User Manual
For D87E21N1GB/03.
PDF File Manual
,
12 pages
,
Read Online
|
Download pdf file
[en] Instructions for installation and use 2
Ú Table of contents[en] Instructions for installation and use
Instruction manual
Produktinfo
To book an engineer visit and product advice
Environmental protection
m Safety instructions
General information
Danger of suffocation!
Installation
Mortal danger, risk of intoxication!
Risk of fire!
Caution!
Risk of electric shock!
Risk of fire, risk of injury!
Risk of injury!
Risk of injury!
Using the appliance
Risk of burns!
Risk of injury, risk of damage!
Risk of fire, risk of burns!
Risk of burns, risk of damage!
Risk of fire!
Caution!
Risk of injury!
Cleaning and care
Risk of burns, risk of electric shock!
Caution!
Maintenance and repair
Risk of fire, risk of injury!
Risk of injury!
Risk of fire, risk of injury!
Risk of burns, risk of electric shock!
Operating modes
Exhaust air mode
Note
Circulating-air mode
Note
Operation
Note
Control panel variant 1
Control panel variant 2
Switching on fan: variant 1
Intensive setting
Fan run-on
Switching on fan: variant 2
Light
Installing and removing filter
m Risk of burns, risk of electric shock!
Removing metal-mesh grease filter
1. Open lock and fold down the metal-mesh grease filter.
2. Take metal-mesh grease filter out of the holder.
With edge extraction
1. Pull metal-mesh grease filter downwards.
2. Take metal-mesh grease filter out of the holder.
Notes
Installing metal-mesh grease filter
1. Insert metal-mesh grease filter.
2. Fold up metal-mesh grease filter and lock.
Cleaning and care
m Risk of burns, risk of electric shock!
Caution!
Cleaning appliance surface
Note
Cleaning metal-mesh grease filters
Notes
In the dishwasher:
Note
By hand:
Note
Replacing bulbs
m Risk of burns, risk of electric shock!
Replacing halogen bulbs
Note
1. Carefully remove bulb ring using a suitable tool.
2. Pull out bulb and replace with bulb of the same type.
3. Insert bulb cover.
4. Insert mains plug or switch on fuse again.
Replacing filament bulbs
1. Lift bulb cover slightly and push towards the outside of the appliance.
2. Unscrew bulb and replace with bulb of the same type.
3. Insert bulb cover.
4. Insert mains plug or switch on fuse again.
LED lights
m Risk of injury!
Installation instructions
Installation instructions
Safety notes
m Mortal danger, risk of intoxication!
m Risk of fire!
m Risk of electric shock!
m Risk of injury!
m Risk of injury!
Installation
Pipe dimensions
Note
Checking the wall
Preparing the installation
1. Mark a vertical centre line on the wall from the ceiling to the lower edge of the extractor hood.
2. Mark positions for the screws and the contour of the attachment area.
3. Drill five 8 mm Ø holes to a depth of 80 mm for the attachments and press in the wall plugs flush with the wall.
Installation
1. Screw on the fixing bracket for the flue duct. ¨
2. Screw on brackets for the extractor hood hand-tight, max. 3 Nm. ©
3. Screw in threaded pin, leaving it protruding out of the wall by 5–9 mm. ª
Attaching and aligning the appliance
1. Initially remove the protective foil from the back of the appliance and, following installation, remove foil completely.
2. When attaching the appliance, ensure that it engages firmly with the brackets. «
3. Align the appliance horizontally by turning the brackets. If required, the appliance can be moved to the right or left. ¬
Securing the appliance
1. Press the safety caps with the arrow upwards onto the brackets until they engage. ®
2. Screw on knurled nut and washer firmly. ¯
Removing safety caps
Connecting the pipes
Note
Exhaust-air pipe Ø 120 mm
1. Attach reducing connector directly to the air-pipe connector.
2. Attach exhaust air pipe to the reducing connector.
3. Seal both joints appropriately.
Electrical connection
m Risk of electric shock!
Attaching flue duct
m Risk of injury!
1. Separate the flue ducts.
2. Remove the protective foil from both flue ducts.
3. Push one flue duct into the other.
Notes
4. Place flue ducts on the appliance.
5. Push inner flue duct upwards and attach to the fixing brackets on the left and right. ¨
6. Press flue duct downwards until it engages. ©
7. Screw flue duct to the sides of the fixing bracket using two screws. ª
Page 1/12
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Contents
Table of Contents
Search
Previous
Next
Bookmarks
[en
] Instructions for
instal
latio
n a
nd
use
....
...
..
..
2
Ext
rac
tor
ho
od
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 45346045_d87e21n1gb-01.pdf
File size: 1.43 MB
File Language: English
Pages: 12
Author: Neff
Published:
2020-08-15
Updated: 2023-07-26
Download File
Other documents for Neff D87E21N1GB/03
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Other Documents
Download Safety instructions - (English)
Download
Photos
Photos:
View Photos
Specifications
Brand:
Neff
Model: D87E21N1GB/03
Category:
Hoods
See other models:
S586T60D0G
T1873N1/01
T46BD60N0/03
T46PD40X0
V5340X2EU/07
Related Products
Neff D87E21N1GB/01
Neff D87E21N1GB/04
Neff D87E21N1GB/02
Neff D87E21N0GB/01
Neff D87E34S0GB/01
Neff D87E34N0GB/01
Neff D87ER22N0B/03
Neff D87ER22N0B/02
Neff D87ER22N0B/04
Neff D87ER22N0B/01
Neff HLAWD53N0B
Neff T58FD20X0/03
Neff S511A50X0G
Neff T27BB59N0
Neff T36FB41X0G
Table of Contents
×
[en] Instructions for installation and use 2
1
Ú Table of contents[en] Instructions for installation and use
2
Instruction manual
2
Produktinfo
2
To book an engineer visit and product advice
2
Environmental protection
2
m Safety instructions
2
General information
2
Danger of suffocation!
2
Installation
2
Mortal danger, risk of intoxication!
2
Risk of fire!
3
Caution!
3
Risk of electric shock!
3
Risk of fire, risk of injury!
3
Risk of injury!
3
Risk of injury!
3
Using the appliance
3
Risk of burns!
3
Risk of injury, risk of damage!
3
Risk of fire, risk of burns!
3
Risk of burns, risk of damage!
3
Risk of fire!
3
Caution!
3
Risk of injury!
3
Cleaning and care
3
Risk of burns, risk of electric shock!
3
Caution!
3
Maintenance and repair
3
Risk of fire, risk of injury!
3
Risk of injury!
3
Risk of fire, risk of injury!
3
Risk of burns, risk of electric shock!
3
Operating modes
4
Exhaust air mode
4
Note
4
Circulating-air mode
4
Note
4
Operation
4
Note
4
Control panel variant 1
4
Control panel variant 2
4
Switching on fan: variant 1
4
Intensive setting
4
Fan run-on
4
Switching on fan: variant 2
4
Light
4
Installing and removing filter
5
m Risk of burns, risk of electric shock!
5
Removing metal-mesh grease filter
5
1. Open lock and fold down the metal-mesh grease filter.
5
2. Take metal-mesh grease filter out of the holder.
5
With edge extraction
5
1. Pull metal-mesh grease filter downwards.
5
2. Take metal-mesh grease filter out of the holder.
5
Notes
5
Installing metal-mesh grease filter
5
1. Insert metal-mesh grease filter.
5
2. Fold up metal-mesh grease filter and lock.
5
Cleaning and care
5
m Risk of burns, risk of electric shock!
5
Caution!
5
Cleaning appliance surface
5
Note
5
Cleaning metal-mesh grease filters
5
Notes
5
In the dishwasher:
5
Note
5
By hand:
5
Note
5
Replacing bulbs
6
m Risk of burns, risk of electric shock!
6
Replacing halogen bulbs
6
Note
6
1. Carefully remove bulb ring using a suitable tool.
6
2. Pull out bulb and replace with bulb of the same type.
6
3. Insert bulb cover.
6
4. Insert mains plug or switch on fuse again.
6
Replacing filament bulbs
6
1. Lift bulb cover slightly and push towards the outside of the appliance.
6
2. Unscrew bulb and replace with bulb of the same type.
6
3. Insert bulb cover.
6
4. Insert mains plug or switch on fuse again.
6
LED lights
6
m Risk of injury!
6
Installation instructions
7
Installation instructions
7
Safety notes
7
m Mortal danger, risk of intoxication!
7
m Risk of fire!
7
m Risk of electric shock!
7
m Risk of injury!
7
m Risk of injury!
7
Installation
8
Pipe dimensions
8
Note
8
Checking the wall
8
Preparing the installation
8
1. Mark a vertical centre line on the wall from the ceiling to the lower edge of the extractor hood.
8
2. Mark positions for the screws and the contour of the attachment area.
8
3. Drill five 8 mm Ø holes to a depth of 80 mm for the attachments and press in the wall plugs flush with the wall.
8
Installation
8
1. Screw on the fixing bracket for the flue duct. ¨
8
2. Screw on brackets for the extractor hood hand-tight, max. 3 Nm. ©
9
3. Screw in threaded pin, leaving it protruding out of the wall by 5–9 mm. ª
9
Attaching and aligning the appliance
9
1. Initially remove the protective foil from the back of the appliance and, following installation, remove foil completely.
9
2. When attaching the appliance, ensure that it engages firmly with the brackets. «
9
3. Align the appliance horizontally by turning the brackets. If required, the appliance can be moved to the right or left. ¬
9
Securing the appliance
9
1. Press the safety caps with the arrow upwards onto the brackets until they engage. ®
9
2. Screw on knurled nut and washer firmly. ¯
9
Removing safety caps
9
Connecting the pipes
10
Note
10
Exhaust-air pipe Ø 120 mm
10
1. Attach reducing connector directly to the air-pipe connector.
10
2. Attach exhaust air pipe to the reducing connector.
10
3. Seal both joints appropriately.
10
Electrical connection
10
m Risk of electric shock!
10
Attaching flue duct
10
m Risk of injury!
10
1. Separate the flue ducts.
10
2. Remove the protective foil from both flue ducts.
10
3. Push one flue duct into the other.
10
Notes
10
4. Place flue ducts on the appliance.
10
5. Push inner flue duct upwards and attach to the fixing brackets on the left and right. ¨
10
6. Press flue duct downwards until it engages. ©
10
7. Screw flue duct to the sides of the fixing bracket using two screws. ª
10
Search:
×
Search
