Loading ...
Loading ...
Loading ...
Adjusting
56
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "MDrive" and press the controller.
The functions contained in MDrive are dis-
played:
> "SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: shifting modes and Drive-
logic driving programs, refer to page 64
> "EDC"
Programs of the Electronic Damping
Control, refer to page 86
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page 84
> "POWER"
Programs of the M Engine Dynamics
Control, refer to page 65
> "Head-Up Display"
*
Views of the Head-Up Display, refer to
page 94
You can reset all settings for MDrive to their
default values:
> "Reset to default"
4. Select the desired function.
5. Press the controller.
6. Turn the controller to select the desired set-
ting.
"Unchanged" retains the current setting
made outside of MDrive.
7. Press the controller.
The setting is stored for the remote control cur-
rently in use.
Activating settings
Press the button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
contained in MDrive are active.
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer flashes.<
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
Loading ...
Loading ...
Loading ...