Loading ...
Loading ...
Loading ...
2. Remove the tail lamp assembly by removing the two
screws from the inboard side. Use a fiber stick or similar
tool to gently pry the light on the outboard side to
disengage the two ball studs.
NOTE:
•
If a screwdriver is used, make sure a soft material is
placed between the vehicle body and tool so not to
scratch the paint.
•
The PRY location is best closest to the studs while
dislodging them separately.
Tail Lamp Housing Fastener Removal
7
MAINTAINING YOUR VEHICLE 483
Loading ...
Loading ...
Loading ...