User Manual Frigidaire FFBD2408NW 24'' Built-in Dishwasher

Some of our models have a dial that can be adjusted for the rinse aid dosage while others require you to use your control pad. Since our models may vary, we recommend referencing your Owner’s Manual to determine what is applicable to your dishwasher.

If your dishwasher is not starting, we recommend you check the following:

Make sure you have not inadvertently set DELAY START or CHILD LOCK.
Make sure you have pressed START/CANCEL after selecting your cycles.
Make sure you have closed door immediately to avoid having to reselect your cycle/options. If you added a forgotten item or interrupted the cycle, you may need to press START again for the cycle to resume once you close the door.
Make sure the dishwasher door is properly closed.
Make sure your water supply is turned on.
Check to see if the circuit breaker is tripped or if a fuse is blown.

For additional help, refer to your Owner’s Manual .

If you are unable to resolve an issue or need more information, please contact us. ​

Since the adjustability of your racks may vary by model, we recommend that you first reference your Owner’s Manual.

However, here are some helpful tips depending on your dishwasher tub type:

For Plastic Tub Dishwashers -

To raise the upper rack, press the lever on the rack toward the center of the rack and pull straight up.

To lower the upper rack, press the lever and push down on the rack. Your Owner’s Manual may have a diagram for assistance.

For Stainless Tub Dishwashers -

The top rack height can be easily adjusted to accommodate loading taller dishes.

To raise the rack, lift up until both sides are at the same height and the rack will secure in place. Ensure the rack remains level from front to back with both sides at the same height.

To lower the rack, lift the rack slightly then push down and release.