Loading ...
Loading ...
Loading ...
5. Push on the locking tab on the headlamp bulb connector
and remove the bulb and socket.
6. Install the new headlamp bulb making sure it’s properly
locked.
7. Install the headlamp bulb and socket; turn it clockwise
making sure it is properly locked.
8. Reinstall the wheel liner.
NOTE: We advise referring to an authorized dealer.
WARNING!
Carry out the operation of replacing lamps only with
the engine off. Also make sure that the engine is cold,
to avoid the danger of burns.
Turn Signal Light/Position Lights/Daytime Running
Lights
To replace the bulbs proceed as follows:
1. Turn the front wheels completely.
2. Remove the wheel liner.
3. Remove the electrical connectors.
4. For the DRL bulb, grip the bulb at the top and bottom
locking tabs and squeeze to and remove the bulb.
5. To replace the DRL bulb gently push bulb towards
housing. Be sure to hear both the top and bottom
locking tabs “CLICK” to ensure the bulb is properly
seated.
6. For the turn signal bulb, rotate in a counterclockwise
direction and remove the bulb and bulb socket. Pull the
bulb axially to remove it from the socket.
Headlamp Bulb Socket
332 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...