Loading ...
Loading ...
Loading ...
12
stubble particles. Be careful not to tap foil.
For easy cleaning, you may rinse your shaver with water. While the
foils can be rinsed, we recommed removing the foil head, and rinsing
the cutter bars. This will allow any hairs still on the cutter bars to be
washed away. Leaving the foil head on while rinsing makes in more
difficult for hairs to be washed clean.
TO REMOVE CUTTER BAR
Turn shaver off. Remove the foil head
and, holding the shaver in one hand,
gently pull up on cutter bar. Be sure your
thumb and first finger are positioned at
each end of the cutter bar.
WARNING: Handle cutting components
with care to avoid personal injury.
NOTE: If you do not hold the cutter bar as
shown, brushing the blades could result in
damage to the assembly.
When the foil head and cutter bars are
removed from the shaver, an alternate
cleaning method is to rinse them under
running water. Simply let them air dry.
After cleaning, replace the cutter bars by
pressing down gently. Carefully replace
the foil head, snapping it into place.
From time to time, depending on the density of your beard, you will
need to replace the cutters and foils. If you notice that it is taking
you longer to shave, or if your face starts to feel some irritation, or
if the foil seems to become warm to the touch, it is probably time to
replace the cutters and foils. Replace the cutters and foils only with
WAHL parts (Yellow: 7045-100, Silver: 7045-400, Black Chrome:
7045-700).
Loading ...
Loading ...
Loading ...