Loading ...
Loading ...
Loading ...
Adjust the settings - more you can do
Adjust the language settings
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD.
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list
in the reference chapter (see page 18). If you make a mistake before
pressing ENTER, press CLEAR.
[Off] (for Disc Subtitle): Turn off Subtitle.
9
Adjust the settings
ON REMOTE
1Display setup menu : SETUP
2 Select a desired option on the first level:
UU uu
3 Move to second level:
ii
4 Select a desired option on the second level:
UU uu
5 Move to third level:
ii
6 Change the setting:
UU uu
, ENTER
OSD Initial language settings - Optional
1Turn the power on :
The language list appears POWER
2 Select the language :
UU uu II ii
3 Press : ENTER
4To confirm press :
II ii
and ENTER
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
ON REMOTE
Initial Setting the Area Code - Optional
1Display setup menu : SETUP
2Select LOCK menu on the first level :
UU uu
3 Move to second level :
The activated Area Code appears on the
second level.
ii
4 Move to the third level :
ii
5 Enter a new password : numerical buttons
(0-9) and ENTER
6 Recheck the entered new password : numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area :
After select, Rating and Password will be
UU uu II ii
and
activated. (page 18) ENTER
8To confirm what you press :
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password ENTER
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
HT554TH-D0_BGBRLL_ENG_0721 3/18/09 12:05 PM Page 9
Loading ...
Loading ...
Loading ...