Loading ...
Loading ...
Loading ...
14
HOW TO TURN THE HOM-BOT POWER SUPPLY ON & OFF
To turn the power supply on, turn the HOM-BOT upside down
on a smooth/soft surface and check whether the main power
supply switch is turned on.
If the main power supply switch is turned off, turn on the
switch.
※
When turning on the power switch, do not press the button
located at the upper section of the HOM-BOT. Operation of
the button can be delayed.
※ Turn off the power switch if the HOM-BOT will not be used
for a long period of time, in order to protect the battery.
※ The power switch cover is used for protecting the switch
from the dust. Always keep the cover attached.
When the HOM-BOT is not at the Home Station, and is in
the Stand by mode, press the ‘START/STOP’ button for
more than 1 second. The HOM-BOT will be turned on and
a melody will be sounded.
※
If the power is turned on while the HOM-BOT is not at
the Home Station, and nothing is done for ten minutes,
the unit will turn off and enter Standby mode to reduce
battery consumption.
Press the START/STOP button for two seconds while the
HOM-BOT is turned on. A melody will sound when the
power is turned off.
Turning on the main power supply
Turning on from Stand By mode.
Turning off the unit
• The power can be turned off due to the static electricity during
the operation.
- If the power is turned off, turn off the main power switch and
then turn it back on.
• If the power cannot be turned on, do the following.
- Turn on the power switch and wait for more than 3 seconds.
- Press the ‘START/STOP’ button when the power switch is
turned on.
- If the power is not turned on or if there is no display but only
the “Ting” sound, put the HOM-BOT on the home station.
- If there is no change even when HOM-BOT is attached to the
home station, press the reset switch located on the rear side
of the home station while the HOM-BOT is attached on the
home station.
Tip
Loading ...
Loading ...
Loading ...