Loading ...
Loading ...
PROGRAMMES
For choosing the appropriate programme for your
kind of laundry, always respect the instructions on
the care labels of the laundry. The value given in the
tub symbol is the maximum temperature possible for
washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton,
linen, synthetic bres and mixed bres.
White
For washing normally to heavily soiled towels, underwear, table
and bed linen, etc in resilient cotton and linen. Only when the
temperature is selected at 90°C the cycle is provided with a
prewash phase before main washing phase. In this case it is
recommended to add detergent both, in the prewash and main
wash section.
Cotton
Normally to heavily soiled and robust cottons .
Eco Cotton
For washing normally soiled cotton garments. At 40°c and 60°C,
this is the standard cotton programme and the most ecient in
terms of water and energy consumption.
Sport
For washing lightly soiled sports clothing (tracksuits, shorts, etc.).
For best results, we recommend not exceeding the maximum load
indicated in the ‚‘‘PROGRAMME CHART‘‘. We recommend using
liquid detergent , and adding the amount suitable for half-load.
Duvet
Designed for washing eiderdown padded items such as double
or single duvets, cushions and anoraks. It is recommended to load
such padded items in the drum with the edges folded inwards
and not to exceed ¾ of the drum’s volume. For optimal washing,
we recommend using a liquid detergent.
Jeans
Turn garments inside-out before washing and use a liquid
detergent.
Spin & Drain
Spins the load then empties the water. For resilient garments. If
you exclude the spin cycle, the machine will drain only
Rinse & Spin
Rinses and then spins. For resilient garments.
Rapid 30’
For washing lightly soiled garments quickly. This cycle lasts only
30 minutes, saving time and energy.
Colours 15°
This cycle helps protect colours by washing in cold water (15°C)
and uses less energy to heat the water while still oering
satisfactory wash results. Suitable for lightly soiled, ustained
garments. This cycle oers wash results comparable to 40°c mixed
at just 15°C
Wool
All wool garments can be washed using programme ‚“Wool“ even
those carryng the “hand-wash only “ label. For best results, use
special detergents and do not exceed max kg declaration of
laundry.
Delicates
For washing particularly delicate garments. Preferably turn
garments inside out before washing.
Synthetics
For washing soiled garments made from synthetic bres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton”
programme at a temperature of 60°C. Pour a small quantity of
detergent powder into the main wash 2 compartment of the
detergent dispenser (maximum 1/3 of the quantity the detergent
manufacturer recommends for lightly soiled laundry). Start the
programme without adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in
the “HINTS AND TIPS” section. Load the laundry, close the door,
open the water tap and press the “ON/OFF” button to switch
the washing machine on, the “Start/Pause” button ashes.
Turn the programme selector to the desired programme and
select any option if needed. The temperature and spin speed
can be changed by pressing the “Temp.” button or the “Spin
Speed” button. Pull out the detergent dispenser and add the
detergent (and additives/softener) now. Observe the dosing
recommendations on the detergent pack. Then close the
detergent dispenser and press the “Start/Pause” button. The
“Start/Pause” button will lights up and the door will be locked.
PAUSE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause” ; the indicator
light will go o and the remaining time on display ash. To start
the wash cycle from the point at which it was interrupted press
the button again.
OPEN THE DOOR, IF REQUIRED
After starting a programme, the “Door locked” indicator lights
up to show that the door can not be opened. As long as a wash
programme is running, the door remains locked. To open the
door while a programme is in progress, press the “Start/Pause”
to pause the programme. Provided the water level and/or
temperature is/are not too high, the “Door locked” indicator
light goes o and you can open the door. For example to add
or remove laundry. Press the “Start/Pause” button again to
continue the programme.
PROGRAMME END
The “Door locked” indicator light goes o and the display
shows “End”. To switch o the washing machine after programme
ends press the
“ON/OFF” button, the lights goes o. If you do not press “ON/
OFF” button, the washing machine will switch o automatically
after about a half of an hour. Close the water tap, open the door
and unload the washing machine. Leave the door ajar to allow the
drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set,
the incompatibility will be signalled by a buzzer (3 beeps) and the
corresponding indicator light will ash.
! If the selected option is incompatible with another previously set
option, only the most recent selection will remain active.
Clean+
Clean+ is an option working on 3 dierent levels (Intensive, Daily
and Fast) that are specially designed to set the right washing
action, depending on your cleaning needs:
Intensive : this option is designed for high levels of dirtiness,
removing most stubborn stains.
Daily : this option is designed to remove everyday stains.
Fast : this option is designed to remove lightly soiled stains.
Intensive rinse
By selecting this option, the eciency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin. Press the button once, two or three times
to select an additional 1
+1
, 2
+2
or 3
+3
rinses after the standard
cycle rinse and remove all traces of detergent. Press the button
again to go back to the “Normal rinse” rinse type.
Start delay
To set the selected programme to start at a later time, press the
button to set the desired delay time. Symbol lights on the
display when this fuction is enabled. To cancel the delayed start,
press the button again until the value ‚‘‘0‘‘ is shown on the display.
FreshCare+
This option enhances washing performance by generating
steam to inhibit the proliferation of the main bad odour sources
inside the machine. After steam phase, the washing machine will
perform gentle tumbling through slow rotations of the drum.
FreshCare+ option starts after the cycle ends for a maximum
duration of 6h and you can interrupt at any time by pressing any
button on control panel or turning the knob.
(*) Wait around 5’ before open the door.
Loading ...
Loading ...
Loading ...