Loading ...
Loading ...
Loading ...
5
CONTROL PANEL & FEATURES
DRYER CYCLE KNOB
Use your Dryer Cycle Knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specied time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting.
TEMPERATURE
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
1
2
3
WRINKLE PREVENT OPTION (on some models)
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
PREVENT option periodically tumbles, rearranges, and uffs
the load to help keep wrinkles from forming.
n
To get periodic, heat-free tumbling at the end of a cycle,
turn the WRINKLE PREVENT knob to ON or OFF at any
time before the cycle has ended.
NOTE: This option is available only on Automatic Cycles.
PUSH TO START/ END OF CYCLE SIGNAL
The End of Cycle Signal produces an audible sound when
the drying cycle is nished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Turn the PUSH TO START/ END OF CYCLE SIGNAL knob
to select the desired setting (On or Off). Press the PUSH TO
START/ END OF CYCLE SIGNAL knob to start the dryer.
NOTE: When the Wrinkle Prevent option is selected
and the End of Cycle Signal is on, the tone will sound
every 5minutes until the clothes are removed, or the
Wrinkle Prevent setting ends.
4
Not all features and options are available on all models.
Appearance may vary.
2 3
1
4
1
4
Loading ...
Loading ...
Loading ...