Loading ...
Loading ...
Loading ...
7
Ifyourrefrigeratorwillnottthroughanentrancearea,youcanreduceitssizebyremovingthedoors.Checkrstby
measuring the entrance.
You will need the following tools:
Make sure the electrical power cord is unplugged from the wall
outlet.
2 Open both doors and remove the toe grille (as explained in the
Installation Instructions that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
Remove the three screws from each cover over the top door
hinges.
2 Lift hinge cover straight up and off.
Trace lightly around the door’s top hinge with a pencil. This
makes reinstallation easier.
2 Remove the two screws from the top hinge. Lift the door off of
the bottom hinge and set it aside.
3 Remove the two bottom hinge screws and hinge if necessary.
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR
To p Hinge
Cover Rear
Screw
To p Hinge
Cover Front
Screw
Bottom
Hinge
Screw
To p
Hinge
Screw
To reinstall the refrigerator door, reverse the above steps.
Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury.
Loading ...
Loading ...
Loading ...