Loading ...
Loading ...
Loading ...
en Appliance door
18
Attaching the rails
The rails only fit on the right or the left side. For both
rails, ensure that the curved rods are at the front.
1. First, insert the rail in the middle of the rear socket ‚,
until the rail rests against the cooking compartment
wall, and push it back ƒ (figure !).
2. Then insert the rail into the front socket „, until the
rail also rests against the cooking compartment wall
here, and press it downwards … (figure ").
qAppliance door
Ap p l i a n c e door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Locking the appliance door
1. Open the appliance door fully.
2. Open the two locking levers on the left and right
(fig. !).
3. Close the appliance door as far as it goes (fig. ").
Removing panels
1. Open the appliance door slightly.
2. Press the left- and right-hand sides of the cover
(fig.°!).
3. Remove the cover (fig. ").
4. Lift out the outer panel (fig. #) and set it down
carefully on a flat surface.
5. Lift out the inner panel (fig. $) and set it down
carefully on a flat surface.
2
F
G
1
D
E
2
1
2
1
g
Loading ...
Loading ...
Loading ...