Loading ...
Loading ...
Loading ...
5
2. Attach tape to the bracket of
the camera, and drill a small
hole for the first screw.
3. Use a screw driver to fix the
first screw, but don’t tighten
it yet.
4. Insert camera wire through
newly drilled hole and mount
securely in place.
Suggested location
to mount camera
5. Mark the position suitable for
the second screw and drill a
small hole for it.
6. Fix the second screw and
tighten both screws.
Camera Installation - Butterfly
Mount
1. Select a flat and centred location near
the number plate lamp at the rear of the
vehicle to mount camera.
IMPORTANT: When selecting this location it is highly recommended that the image transmitted by
the camera show the rear bumper and area behind the vehicle.
Camera Installation - Flush Mount
1. Unscrew the upper part of the camera anticlockwise, detach the
upper part and bracket, and place the bumper adaptor instead.
2. On the bumper, mark the middle position
(both horizontally and vertically) where the
camera is going, and drill a hole with the
provided 16.5mm hole saw.
3. Ensure the "UP" arrow is positioned upwards.
As pictured.
4. Feed the camera lead through the
bumper hole before fixing the camera to
the bumper.
5. To ensure tight and flat mounting, put the
camera into the hole and using both thumbs,
press evenly.
Loading ...
Loading ...
Loading ...