Loading ...
Loading ...
Loading ...
User instructions
13
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
ENERSAVE
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving. Once the door has opened, the end of the
wash cycle is indicated by a short beep.
Enersave is activated
automatically every time
a wash cycle is
selected (except for programs that do not include the final drying phase;
see programs table) and can be disabled before the program is started.
Flexi Tabs, once selected, remains enabled until intentionally disabled.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.
SPREAD HALF LOAD
When there are not many dishes to be watched, the “spread half load”
option, controlled by button is useful; it saves water and electricity and
reduces the program’s duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
Loading ...
Loading ...
Loading ...