Loading ...
Loading ...
Loading ...
14
ADJUSTING THE COFFEE MILL
The coee mill is preset in the factory to make coee correctly
and should not require adjusting initially.
However, if after making the rst few coees you nd that de-
livery is either too fast or too slow (a drop at a time), this can be
corrected by adjusting the grinding adjustment knob (g. 12).
Turn one click clockwise (one number) for more rapid coee
delivery (not a drop at a time).
Turn one click anticlockwise for slower coee delivery and a
creamier coee. These adjustments will only be evident after at
least 2 cups of coee have been delivered.
The grinding adjustment knob must only be turned when the
coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlock-
wise (ner pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coee).
(Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coee in
the mill. It is, however, guaranteed to be new.)
MAKING ESPRESSO COFFEE WITH PREGROUND
COFFEE INSTEAD OF BEANS
button (C3) (g. 16) to select the pre-
ground coee function. This disables the coee mill func-
tion.
The appliance now displays the message: “READY PRE-
GROUND”.
-
dles.
in the funnel (g. 17), push the appliance in then proceed
as described in the section “Making coee using coee
beans”.
N.B.: You can make just one coee at a time by pressing the
(C8), (C9) or (C10) button once only.
to making coee using beans, deactivate the pre-ground
coee function by pressing the button (C7) again to
enable the coee mill.
NOTE 1: Never introduce pre-ground coee when the machine is
o or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 level measure, otherwise either
the appliance will not make the coee and the pre-ground
coee will be dispersed inside the appliance, dirtying it, or the
coee will be delivered a drop at a time.
NOTE 3: Use the measure provided to add the right amount of
coee.
NOTE 4: Introduce only pre-ground coee for espresso coee
machines into the funnel. Never ll with coee beans, freeze
dried coee or other substance that could damage the appli-
ance.
NOTE 5: If more than one measure of pre-ground coee is used
and the funnel clogs, push the coee down with a knife (g. 18)
then remove and clean the infuser and machine as described in
the “Cleaning the infuser” section.
DELIVERING HOT WATER
button (C5) (g. 1).
The message “HOT WATER” is displayed and hot water ows
out of the hot water spout into the container.
(You should not deliver hot water for more than 2 minutes
at a time).
To interrupt the ow, press the button (C5).
Once the set quantity of hot water has been reached, deliv-
ery stops automatically.
CHANGING THE QUANTITY OF HOT WATER
The appliance is set by default to automatically deliver about
200 ml of hot water.
To change these quantities, proceed as follows:
button (C5) down for at least 2 seconds then
release it. The message “HOT WATER PROGRAM QUANTITY”
is displayed and hot water ows out of the hot water spout.
press the button (C5) to memorise the new amount.
(You should not deliver hot water for more than 2 minutes
at a time).
MAKING CAPPUCCINO FROTHED MILK AND COF
FEE
cappuccino by pressing the button (C7).
Loading ...
Loading ...
Loading ...