Loading ...
Loading ...
Loading ...
Basic settings en
33
Basic settings
9 Basic settings
You can configure the basic settings for your appliance to meet your needs.
9.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Setting Selection Meaning
Button tone ¡
1
¡
Switch the button tone on and off.
Note:The button tone remains active for and .
Demo mode Activate or deactivate demo mode.
Note:The appliance is switched off. You can use the buttons and the display; the but-
tons do not work. Demo mode is mainly useful for dealers.
1
Factory setting (may vary according to model)
9.2 Changing basic settings
Requirement:The appliance is switched off.
1.
Press and hold and for a few seconds.
a The display shows the first basic setting.
2.
Press .
a The current value flashes on the display.
3.
Set the desired value with the rotary selector.
4.
To accept the basic setting, press .
5.
To exit the basic setting, press .
6.
Use the rotary selector to change to the basic set-
ting .
7.
To edit the basic setting, press .
a The selected setting lights up on the display.
8.
Set the desired value with the rotary selector.
9.
To accept the basic setting, press .
10.
To exit the basic setting, press .
11.
To exit the basic settings menu, press again.
Tip:The setting can be changed at any time.
9.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
▶
Press and hold for approx. sixseconds.
a The signal duration switches between short and
long.
a The appliance applies the signal duration and dis-
plays the time.
9.4 Setting the time
Note:After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
1.
Press .
a 12:00 is shown on the display. The indicator light
lights up via .
2.
Set the clock using the rotary selector.
3.
Press .
9.5 Hiding the clock
To reduce the standby consumption of your appliance,
you can hide the clock.
1.
Press .
2.
Press .
To view the clock, press again.
Cleaning and servicing
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning products
Only use suitable cleaning agents.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
▶ Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
New sponge cloths contain residues from production.
▶ Wash new sponge cloths thoroughly before use.
You can find out which cleaning products are suitable
for each surface or part of the appliance in the indi-
vidual cleaning instructions.
Loading ...
Loading ...
Loading ...