Loading ...
Loading ...
Loading ...
40
English
Ta pe Operation/Recording
IMPORTANT!
Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
Ta pe playback
1 Press 5 to open the tape deck door.
2 Insert a recorded tape and close the tape door.
Load the tape with the open side down and the
full spool to the left.
3 Press TAPE or TAPE1/2 on the remote control
repeatedly to select tape deck 1 or tape deck 2.
The selected tape deck number is displayed.
4 Press 38 to start playback.
To stop playback
Press 7.
Changing the playback mode
Press AUTO REPLAY repeatedly to select:
PLAY or REPLAY. The default setting is PLAY.
REPLAY ...................... the tape will rewind
automatically at the end of
playback and replay. It will
replay up to max. 10 times
or until you press 9.
PLAY .............................. the selected side will be
played once.
Rewinding or forwarding fast when
playback is stopped
1 Press 1 or ¡ on the front panel or on the
remote control.
2 Press 7 when you reach the desired passage.
Resetting tape counter number
In stop mode, press 7.
General information on
recording
If you don’t intend to record via the
microphone, unplug it to avoid unwanted
recording source.
For recording, only use tape of IEC type I(normal
tape).
The recording level is set automatically,
regardless of the position of the Volume, Vocal,
Key control and so forth.
The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
Press RECORD in Disc, Tape, Tuner or AUX
mode,PLEASE CHECK TAPE 2 will scroll
on the display if there is no recordable tape in
tape deck 2.
p026-051-FWD798_37_EngB 2006.5.22, 3:21 PM40
Loading ...
Loading ...
Loading ...