Loading ...
Loading ...
Loading ...
409
3-7. Other interior features
3
Interior features
Test the operation of the HomeLink
by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
buttons.
■ Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■ Reprogramming a button
The individual HomeLink
buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink
button. The HomeLink
indicator
light on the HomeLink
transceiver should turn on.
The HomeLink
continues to send a signal for up to 20 seconds as long
as the button is pressed.
Erasing the entire HomeLink
memory (all three programs)
Press and hold down the 2 out-
side buttons for 10 seconds (or
20 seconds depending on the
model) until the indicator light
flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
memory.
STEP
5
STEP
6
Loading ...
Loading ...
Loading ...