User Manual GE Profile™ PWE23KELDS 23.1 Cu. Ft. Counter-Depth French-Door Refrigerator

GE Profile™ PWE23KELDS 23.1 Cu. Ft. Counter-Depth French-Door Refrigerator - Use Manual - Use Guide PDF.
Documents: Go to download!
  • Owner's manual - (English, French, Spanish)



OPERATING INSTRUCTIONS

Features

1. Space-saving ice maker

Ice maker and bin are located on the door creating more usable storage space.

2. Showcase LED lighting

LED lighting is positioned throughout the interior to spotlight areas in the refrigerator. LEDs are located under the fresh food door to light the freezer when opened.

3. Drop-down tray

Allows for extra door storage when you need it and tucks away when you don’t.

4. Full-width temperature controlled drawer

Adjustable temperature control bin that can accommodate larger items.

5. Dairy bin

Separate compartment for your items.

6. Ice bin/Ice maker

Ice makerwith ice storage bins.

7. QuickSpace™ shelf

Functions as a normal full-sized shelfwhen needed and easily slides back to store tall items below.

8. Spillproof shelves

Designed to capture your spills for easier clean up.

9. Anti-slip Mat

Liner that captures spills, keeps containers from shifting when the door is opened and is easily removable for cleaning.

10. Removable door bin

Can be removed for those with a wall limiting the door opening.

11. Climate zone bin

Separate bins for produce storage.

12. Water filter

Filters water and ice.

1. Space-saving ice maker

Ice maker and bin are located on the door creating more usable storage space.

2. Showcase LED lighting

LED lighting is positioned throughout the interior to spotlight areas in the refrigerator. LEDs are located under the fresh food door to light the freezer when opened.

3. Full-width temperature controlled drawer

Adjustable temperature control bin that can accommodate larger items

4. Freezer Ice maker/Ice Bin

An ice maker in both compartments give you more ice whenever you need it. Available on Non-Dispense models, also available as a kit for some models.

5. QuickSpace™ shelf

Functions as a normal full-sized shelfwhen needed and easily slides back to store tall items below.

6. Spillproof shelves

Designed to capture your spills for easier clean up

7. Removable door bin

Can be removed for those with a wall limiting the door opening.

8. Climate zone bin

Separate bins for produce storage.

9. Water filter

Filters water and ice.

10. Rotating Bin

Can be rotated out for easy access.

11. Door in Door Latch

Squeeze the latch on the underside ofthe handle to open the outer door.

1. Door ice bin

  1. Open left fresh food door.
  2. Pull down latch to release bin door.
  3. Using handhold lift ice bucket up and out to clear locators in bottom of bin.
  4. To replace the ice bucket, set it on the guide brackets and push until the ice bucket seats properly.
  5. If bucket cannot be replaced, rotate the Ice Bucket Fork 1/4 turn clockwise.

2. Ice/water filter

Certified to reduce chlorine-resistant cysts, lead, select pharmaceuticals, and more.

WARNING: Scalding Hazard.

Use of the hot water dispenser prior to purging air from the system may result in spurting of hot water and lead to hot water scalding.

The first time the hot water feature is used, confirm if you live above 5000 feet (1524 meters) (high altitude). This limits the temperature of the hot water system to avoid boiling. To access the high altitude selection, see Controls.

Controls

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature

in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Changing the Temperature

Temperature Display is located on inside of left-hand refrigerator door. To change the temperature, press and release the REFRIGERATOR or FREEZER pad. The ACTUAL TEMP light will come on and the display will show the actual temperature. To change the temperature, tap either the REFRIGERATOR or FREEZER pad until the desired temperature is displayed.

To turn OFF cooling system, press and hold the REFRIGERATOR and FREEZER pads simultaneously for 3 seconds. When cooling system is OFF the display should read OF. To turn ON cooling system, press either REFRIGERATOR or FREEZER pad. The display will show the preset temperature settings of 37°F (3°C) for refrigerator and 0°F (-18°C) for freezer.

Turning the cooling system off stops the cooling to refrigerator, but it does not shut off the electrical power.

NOTE: For optimal temperature performance, we recommend to avoid placing food items directly at the air flow vents of the fresh food air tower and thus blocking the air flow.

Internal Controls

1. Door Alarm

Sounds to alert when the freezer or fresh food doors have been left open.

2. Reset Filter

Hold for 3 seconds after replacing filter.

3. Lock Controls

Press and hold 3 seconds to lock out ice and water dispenser and all feature and temperature buttons.

4. Freezer temp control

Adjust freezer compartment temperature

5. Refrigerator temp control

Adjust fresh food compartment temperature

6. Ice maker setting

Turn your ice maker on/off.

Additional Mode:

Sabbath Mode

Press and hold Door Alarm and Ice Maker simultaneously for 3 seconds to enter/exit Sabbath mode.

Dispenser

WARNING: Laceration Hazard

  • Never put fingers or any other object into ice crusher discharge opening. Doing so can result in contacting the ice crushing blades and lead to serious injury or amputation
  • Use a sturdy glass when dispensing ice. A delicate glass may break and result in personal injury.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser paddle for at least five minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six full glasses of water.

Important Facts About Your Dispenser

  • Do not add ice from trays or bags to the door ice maker bucket. It may not crush or dispense.
  • Avoid overfilling glass with ice and use of narrow glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute remove the ice bucket, poke it through with a wooden spoon.
  • Beverages and foods should not be quick-chilled in the door ice maker bin. Cans, bottles or food packages in the storage drawer may cause the ice maker or auger to jam.
  • To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.
  • Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.
  • After crushed ice is dispensed, some water may drip from the chute.
  • Sometimes a small mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

To Use the Internal Water Dispenser

The water dispenser is located on the left wall inside the refrigerator compartment.

To dispense water:

1. Hold the glass against the recess.

2. Push the water dispenser button.

3. Hold the glass underneath the dispenser for 2-3 seconds after releasing the dispenser button. Water may continue to dispense after the button is released.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser button for at least 5 minutes to remove trapped air from the water line and to fill the water system. During this process, the dispenser noise may be loud as the air is purged from the water line system. To flush out impurities in the water line, throw away the first 6 glassfuls of water.

NOTE: To avoid water deposits, the dispenser should be cleaned periodically by wiping with a clean cloth or sponge.

AUTOFILL

To Use HANDS FREE AUTOFILL:

  • Center container on Recess Dispenser Tray as far back as possible without activating paddle and remove hand from container
  • Press AUTOFILL

To Stop AUTOFILL

  • Press AUTOFILL to stop.

Important Facts about AUTOFILL

  • For optimum results, use a uniform container between 4-8” (10-20 cm) tall and 2-6” (5-15 cm) wide.
  • Fill level and functionality may vary on containers taller than 8” (20 cm) or wider than 6” (15 cm).
  • Container volumes may vary, if error message “Not Found” is given, try a different container.
  • AUTOFILL will time out.
  • Handles, straws, and garnishes on the rim of the container my cause overfilling or variation in fill volumes.
  • Splashing may occur depending on the location of the container, water flow rate, container shape, and ice cubes.
  • Keep sensors clean with a clean damp cloth, and do not spray liquid or cleaners directly on sensors
  • AUTOFILL works best with household water pressure of 60 to 100 psi (414 to 689 kPa).
  • Ice in container may affect fill volume. If issues are experienced, use less ice.

Single Serve Keurig K-Cup Brewer

How to use the single serve dispenser

1. Load the K-Cup Brewer

Insert a Keurig K-Cup pod into the brewer and press firmly (you will hear a popping sound).

CAUTION: Cut/Puncture Hazard

  • There are two sharp needles located inside the K-Cup brewer. To avoid risk of injury, do not put your fingers inside the brewer. Use caution when cleaning.
  • Keep the K-Cup brewer out of the reach of children, as they may be injured in using the K-Cup brewer incorrectly.

2. Two Ways To Brew

Press the Start Heating button

OR

Initiate heating with the GE Kitchen App. Download the App “GE Kitchen”.

3. Cahnge Brew Size

Press the Brew Size button any time during the heating cycle to choose 6, 8, or 10 oz. The default size is 8 oz. Ensure the mug being used is large enough for the size selected.

NOTE: Press and hold the Brew Size button for 3 seconds to toggle between Coffee and Cocoa. The default is Coffee

NOTE: To abort the heating cycle, press and hold the Start Heating button for 3 seconds. To abort the brew dispense cycle, press and hold the Start Heating button for 3 seconds, press the paddle, press any button on the display besides Brew Size or Brew Dispense, or open the right fresh food door.

4. Dispenser

Once the heating process is complete, the Dispense light on the display will flash.

To dispense, slide the brewer into the rails. Make sure the brewer is pushed all the way into the bracket. Place your mug on the drip tray mug icon, under the red brew spout. Press and hold Brew Dispense for 3 seconds until you hear the dispenser engage.

Cleaning the brewer

  • The K-Cup brewer is top rack dishwasher safe.
  • It is recommended to rinse it thoroughly after washing to remove all soap residue.
  • Periodic cleaning of dispenser recess area is recommended as staining may occur with usage of the K-Cup brewer.

Water Filter Cartridge - RPWFE

The water filter cartridge is located in the fresh food interior on the left side wall, near the top.

Select models use radio frequency identification (RFID) to detect leaks and monitor filter status. The RFID technology is certified by the FCC.

When to Replace the Filter Cartridge

The filter cartridge should be replaced every six months or earlier if 170 gallons (643.52 liters) of water has been dispensed or the flow of water to the dispenser or icemaker decreases.

Touch Screen Models: A filter status message will appear on the screen when the water filter needs to be replaced. The filter status will automatically update when the filter is replaced.

Non-touch Screen Models: A filter indicator light will illuminate on the screen when the water filter needs to be replaced.

Removing the Filter Cartridge/Bypass Plug

1. Remove the old cartridge or bypass plug by opening the filter door and pulling on the bottom of the cartridge/ bypass plug to disengage it from the filter clips. Swing the cartridge/bypass plug outward until you hear the 'click' of the cartridge holder engaging with the bracket.

2. Twist the cartridge/bypass plug one-quarter turn counter-clockwise. After twisting, remove the cartridge/ bypass plug by pulling it away from the cartridge holder. A small amount of water may drip out.

Installing the Filter Cartridge/Bypass Plug

1. Align the filter cartridge/bypass plug with the cartridg holder with the word "FRONT" facing the top of the unit. Push the cartridge/bypass plug toward the rear the unit until it is fully seated. Twist the filter cartridge bypass plug clockwise one-quarter turn, until the wor "FRONT" is facing outward.

2. While continuing to ensure cartridge/bypass plug is fully seated in the holder, gently swing the filter inwai until it is in position. If filter will not swing easily, chec to ensure filter is properly aligned and fully seated within the cartridge holder. The RED indicators shoul not be visible.

NOTE: It is normal for water to appear discolored the initial system flush. Water color will return to n after first few minutes of dispensing.

Filter Bypass Plug

To reduce the risk of property damage due to water leakage, you MUST use the filter bypass plug when a replacement filter cartridge is not available. Some models do not come equipped with the filter bypass plug.

WARNING: SCALDING HAZARD

Use of the hot water dispenser prior to purging air from the system may result in spurting of hot water and lead to hot water scalding. Follow the instructions above to purge all air from the system through the cold water dispenser prior to using the hot water dispenser.

WARNING: To reduce the risk associated with choking, do not allow children under 3 years of age to have access to small parts during the installation of this product. The disposable filter cartridge should be replaced 6 months at the rated capacity, or sooner if a noticeable reduction in flow rate occurs.

For the maximum benefit of your filtration system, GE Appliances, a Haier company, recommends the use of GE Appliances-branded filters only. Using GE Appliances-branded filters in GE Appliances refrigerators provides optimal performance and reliability. Our filters meet rigorous industry NSF standards for safety and quality that are important for products that are filtering your water. There is no assurance that brands other than GE Appliances filters meet our standards for quality, performance and reliability.

Automatic Ice Maker

A newly installed refrigerator may take 12 to 24 hours to begin making ice.

WARNING: Connect to potable water supply only. A cold water supply is required for automatic icemaker operation. The water pressure must be between 40 and 120 psi (275-827 kilopascals).

Automatic Ice maker

The ice maker will produce seven cubes per cycle approximately 100-130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

The ice maker will fill with water when it cools to 15°F (-10°C). A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes.

If the refrigerator is operated before the water line connection is made to the unit or if the water supply to an operating refrigerator is turned off, make sure that the ice maker is turned off. Once the water has been connected to the refrigerator, the ice maker may be turned on.

You may hear a buzzing sound each time the ice maker fills with water.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the ice maker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

NOTE: In homes with lower-than-average water pressure, you may hear the ice maker cycle multiple times when making one batch of ice.

CAUTION: To minimize the risk of personal injury, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic ice making mechanism while the refrigerator is plugged in.

How to Turn the Ice Maker On/Off

Use the “ICE MAKER” button on the control

Ice Bucket and Dispenser

  • Open the ice box door on inside of the left door.
  • Pull up and out on the ice bucket in the left hand door to remove it from the compartment.
  • To replace the ice bucket, set it on the guide brackets and push until the ice bucket seats properly.
  • If bucket cannot be replaced, rotate the ice bucket fork 1/4 turn clockwise.

Ice Maker (Available on Non Dispense models, also available as IM Kit for some models)

There is additional ice storage in the freezer compartment drawer.

  • Open the freezer drawer.
  • The ice bucket is located on the left side of the upper basket.
  • Pull the upper basket forward to remove the ice bucket.

CARE AND CLEANING

Cleaning the Outside

Directions for Cleaning Outside Surfaces, Door Handles, and Trim

DO USE

DO NOT USE

Soft, clean cloth or sponge

Abrasive cloths, scrubbing sponges, scouring or steel wool pads

Mild detergent mixed with warm water Approved stainless steel cleaners.

Cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ can be used to remove surface rust, tarnish and small blemisheson stainless steel surfaces only.

Abrasive powders or sprays Window Sprays or Ammonia Citrus or plant oil-based cleaners Acidic or vinegar-based cleaners Oven cleaners

Cleaners containing acetone (propanone)

Any cleanerwith WARNING about plastic contact

NOTE: DO NOT allow stainless steel cleaner to come in contact with any plastic parts such as trim pieces, handle hardware and liners. If unintentional contact of cleaners with plastic parts does occur, clean plastic part with a sponge and mild detergent mixed with warm water.

Cleaning the Inside

To help prevent odors, leave an open box of baking

soda in the refrigerator and freezer compartments.

Unplug the refrigerator before cleaning.

If this is not practical, wring excess moisture out of sponge or cloth when cleaning around switches, lights or controls.

Use an appliance wax polish on the inside surface between the doors.

Use warm water and baking soda solution—about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Rinse and wipe dry.

To clean the inside metal panel, open the outer door

using the Door in Door Latch. Clean the panel with a mild detergent and then wipe dry with a soft cloth. Do not use any stainless steel cleaner on the panel as it may damage the surrounding plastic.

CAUTION: Do not clean glass shelves or coverswith warm water when they are cold. Glass shelves and covers may break if exposed to sudden temperature changes or impact such as bumping or dropping. Tempered glass is designed to shatter into many small pieces if it breaks.

Do not wash any plastic refrigerator parts in the dishwasher.

Behind the Refrigerator

Be careful when moving the refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.

Raise the leveling legs located at the bottom front of the refrigerator.

Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.

Lower the leveling legs until they touch the floor.

WARNING: ELECTRICAL SHOCK HAZARD

When pushing the refrigerator back, make sure you don't roll over the power cord or water supply line.

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.

If the temperature can drop below freezing, have a qualified service technician drain the water supply system to prevent serious property damage due to flooding.

  1. Turn refrigerator off or unplug the refrigerator.
  2. Empty ice bucket
  3. Turn water supply off

If you cut the water supply off, turn off the ice maker.

Upon returning from vacation:

  1. Replace the water filter.
  2. Run 2 gallons (7.57 liters) of water through the cold water dispenser (about 5 minutes) to flush the system.

Preparing to Move

Secure all loose items such as shelves and drawers by taping them securely in place to prevent damage.

When using a hand truck to move the refrigerator, do not rest the front or back of the refrigerator against the hand truck. This could damage the refrigerator.

Handle only from the sides of the refrigerator.

Be sure the refrigerator stays in an upright position during moving.

Replacing the Lights

Refrigerator Lights (LEDs)

Appearance may vary by model.

There is LED lighting in fresh food compartment and on the bottom of the fresh food doors to light the freezer compartment.

An authorized technician will need to replace the LED light.

TROUBLESHOOTING TIPS

Problem

Possible Causes

What to Do

Water filter indicated as installed incorrectly or a leak is present on cap control panel.Water filter installed backward or is leaking.Checkfor leak. If no leak is present, remove filter/bypass plug, rotate 180° and reinstall.

“Warning Triangle” is lit Replace Filter/Replace Water Filter is lit

Over Due light is lit

Water filter leaking or needs replacing

Water filter backwards

Replace water filter, check for leak Remove filter, rotate 180° and reinstall
Dispenser Off is litControl A, B & C Wrong filter installedReplace filter with proper filter Remove filter, rotate 180° and reinstall
Not filteringFilter bypass installed Controls B & CInstall correct waterfilter
Reset Filter is litWater filter leaking or needs replacing

Replace water filter, or install filter bypass

Press and hold Reset Filter for 3 seconds to reset (Control D only)

Water filter indicator light is not litThis is normal. This indicator will turn on to tell you that you need to replace the filter soon.See About the Water Filter for more information.
Handle is loose/handle has a gap.Handle needs adjustingSee Attach Fresh Food Handle and Attach the Freezer Handle sections for detailed instructions.
Refrigerator beepingThis is door alarm

-Turn off or disable with door closed

-If door open and alarm is sounding, you can only snooze the alarm

Not coolingThe cooling system is offSee About Controls.
Water has poor taste/odorWater dispenser has not been used for a long timeDispense water, until all water in system is replenished.
Water in glass is warmNormal when refrigerator is first installedWait 24 hours for the refrigerator to completely cool down.
Water dispenser has not been used for a long timeDispense water, until all water in system is replenished
Water system has drainedAllow several hours for replenished supply to chill
Water dispenser does not workWater supply line turned off or not connectedSee Installing the Water Line
Water filter clogged or filter/bypass plug not installedReplace filter cartridge or remove filter and install bypass plug
Air may be trapped in the water systemPress the dispenser arm for at least 5 minutes.
Water in reservoir is frozen because the controls are set too coldSet the refrigerator control to a warmer setting and wait 24 hours. If the water does not dispense after 24 hours, call for service
Water spurting from dispenser

Newly installed filter cartridge

Run water from the dispenser for 5

minutes (about 2 gallons)

No water or ice cube productionSupply line or shutoff valve is cloggedCall a plumber

Water filter is clogged

Replace filter cartridge or remove filter and install bypass plug

Filter cartridge not properly installed

Remove and reinstall filter cartridge, being certain that it locks in place.

Ice maker is turned off

Check that the ice maker is turned on. See About the Automatic Ice Maker.
Water is leaking from dispenser

Air may be present in the water line system, causing water to drip after being dispensed

Dispense water for at least 5 minutes to remove air from system
AUTO FILL under fill/no fillNot all containers work with AUTOFILLTry different container

Error message

Clean sensor.
AUTO FILL overfillsNot all containers work with AUTO FILLTry different container
Freezer cooling, fresh food not coolingNormal, when refrigerator first plugged in or after extended power outageWait 24 hours for temperature in both compartments to reach selected temperatures.
Ice dispenser opens after closing freezer drawer

Normal

The ice dispenser door may open after

closing freezer door to allow access

Low brewing flow rateThere may have been a dent at the bottom of K-Cup causing the pin to pierce the filter allowing coffee grounds clogging the bottom pinAvoid using damaged/dented K-cups, and clean the lower needle before next brew
Low brewing flow rate / water drips from inner door

Top needle of the brewer clogged

Unclog the top needle holes using a paper clip and rinse brewer. Rinse brewer after every use.
Brewer is not detected or hot water leaking from top of the brewer

Incorrect assembly of brewer in the bracket

Make sure the Keurig Logo is in the front. Push brewer all the way in the brackets
Coffee dispensed with splash or bubble bursting

Blocked vent hole in the brewer

Make sure the vent hole at the bottom of the brewer is clear from food or any other contamination

Beverage quality not as expected

You may be using non-standard or

out dated K-Cups

Recommend using official Keurig K-cups that are not past expiration and have not been damaged

Liquid drips from the brewer after brewer cycle is completed and the brewer is removed from the bracket

It is possible for liquids to be retained by the brewer and drip when it is removedUse a cloth or container to capture the drips when brewer is removed

Delay when using Keurig K-cup Pod dispenser

To ensure a quality beverage is delivered, a short delay is required to ensure the refrigerator is operating correctlyEnsuring consistent, quality operation requires the refrigerator to delay dispense for a short period of time
After brewing, my powdered beverage is not fully cleared from the used pod

Depending on size selected, the powder may not dissolve fully.

Some powdered beverages develop into ‘clumps’ when left sitting for some time

Shake the powdered pods before brewing to break up these clumps and allow better clearing. For powdered beverage with no filter, use the Cocoa cycle selection

Brewer lid is difficult to close

K-cup is not fully seatedPress K-cup all the way down into the brewer prior to closing the lid. Lower needle must puncture K-cup bfore closing the brewer lid

Brewer leaks during the brew cycle

Trouble in closing brewer lid or damaged K-cupPress K-cup all the way down into the brewer prior to closing the lid. Lower needle must puncture K-cup bfore closing the brewer lid. Recommend using official Keurig K-cups that have not been damaged and have a good seal between the top cover and plastic bottom

Truth or Myth

Truth or Myth?

Answer

Explanation

The refrigerator water filter may require replacement prior to six months

TRUE

The water filter indicator will indicate the need to replace the water filter every six months or 170 gallons of water dispensed (select models only). Water quality varies from city to city. If water flow from the dispenser slows, or ice production decreases, the water filter should be replaced, even though the filter indicator may not indicate the need for replacement.

The automatic ice maker in my refrigerator will produce ice when the refrigerator is plugged into a power receptacle.

MYTH

The refrigerator must be connected to water, and the ice maker must be turned on. Make sure the ice maker is turned on, only after the water line is connected and water is turned on. The ice maker can be turned onloff from the controls and ensure the ice maker is on, as indicated on the refrigerator control panel.

After the refrigerator has been plugged in and connected to water, I will immediately have unlimited chilled water available from the water dispenser.

MYTH

The water dispenser tank located inside the refrigerator stores water for dispensing. The water in this tank requires 24 hours to chill after installation. High usage conditions will not allow time for the water to chill.

After water dispenses, a few drops of water are normal.

TRUE

A few drops of water may fall from the dispenser, after the dispenser paddle has been released. To minimize the drops, remove the glass slowly from the dispenser.

I will never see frost inside the freezer compartment.

MYTH

Frost inside the freezer typically indicates that the door is not properly sealed, or has been left open. If frost is found, clear the frost using a plastic spatula and towel, then check to ensure that no food packages or containers are preventing the freezer door from closing. Check the refrigerator control panel to ensure the door alarm is on.

When the refrigerator is installed, or after replacing the water filter, I must dispense water for five minutes.

TRUE

A newly installed refrigerator or water filter contains air in the water lines. Press the dispenser paddle and dispense cold water for at least 5 minutes to remove air from the water line, and flush the filter.

To fill the ice bucket to the maximum capacity, I should dispense 12 and 18 hours after installation.

TRUE

Dispensing 3-4 cubes 12 hours and 18 hours after installation, allows ice to disperse within the ice bucket, which in turns calls on the ice maker to produce additional ice. Normal ice production = 100 cubes in 24 hours.

I can use the water filter bypass plug to determine if the filter requires replacement.

TRUE

Decrease in flow from the water dispenser, or decreased ice production, may indicate the need to replace the water filter. Install the water filter bypass plug (provided with the refrigerator on some models), and check flow from the dispenser. Ifwater flow returns to normal with the bypass plug in place, replace the water filter.

The top of the refrigerator doors will always be aligned.

MYTH

Several things can affect the fresh food door alignment, including the floor the refrigerator is installed on and loading of doors. If the top ofthe fresh food doors are not aligned, use a 1/4” alien wrench to adjust the right/left hand door. The adjustment screw is located on the bottom right or left hand side of the door; open the freezer door to access the screw.

Refrigerator door handles can be easily tightened.

TRUE

Ifdoor handles are loose or have a gap, the handle can be adjusted using a 1/8” alien wrench, on set screws located on the ends of the handles.

There may be odor and taste problems with your ice.

TRUE

After starting the ice maker, throw away 24 hours of ice production to avoid odor and taste problems.

I can make fine adjustments to the fresh food doors to align them.

TRUE

If the fresh food doors are not aligned, use a 1/4” Allen wrench to adjust the right hand door. The adjustment screw is located on the bottom of the right/left hand door. Open the freezer door to access.

Door handles should always be removed for installation.

MYTH

If the doors must be removed do not remove the handles, or if the refrigerator will fit easily through the passage way opening. Adjust handles that are loose or have a gap, by adjusting 1/8” set screws on either end of handles.

Door removal is always required for installation.

MYTH

Check chart on reverse side ofthis instruction. Doors should only be removed when necessary to prevent damage from passage way or access to final location.

Refrigerator doors that won’t close after installation, can be adjusted to close properly.

TRUE

Door mechanism works best if installed at 90°+. If installed at 180°, remove the door from the mid hinge, and swing the door 180° before reinstalling.

There is an adjustment to rear wheels.

MYTH

Front leveling legs are adjustable and should be used to balance the refrigerator. Leveling legs are used to make initial fresh food door adjustment.

Check for leaks after all water connections are made.

TRUE

While purging the air from the water system, check all water line connections for leaks. Check the connection to the household water supply at back of refrigerator, and door water line connect.

Any packaging residue can be cleaned off the refrigerator using any cleaner.

MYTH

Do not use wax, polish, bleach, or other products containing chlorine on Stainless Steel panels, door handles and trim. Check this instruction under “Cleaning the Outside” for full details.



See other models: GNE29GSKSS GFE28GGKWW GFE28GMKES PWE23KSKSS PYE22KELDS

GE - General Electric PWE23KELDS | File type: PDF | Filename: PWE23KELDS GE Profile™ Series ENERGY STAR® 23.1 Cu. Ft. Counter-Depth French-Door Refrigerator.pdf | Size: 24.39 MB | Language: English, French, Spanish

Download User Manual

Product Infomation and Reviews - PWE23KELDS photo

PWE23KELDS Photo

GE - General Electric in United States

1-800-432-2737 Monday - Friday: 7 a.m. - 10 p.m. ET Saturday - Sunday: 8 a.m. - 6 p.m. E