Loading ...
Loading ...
Loading ...
8
USING YOUR AIR CONDITIONER
Turning the Air Conditoner ON or OFF
Press POWER to turn the air conditoner ON or OFF.
IMPORTANT:
■ If you turn off the air conditioner, wait at least 3
minutes before turning it back on. This prevents
the air conditioner from blowing a fuse or tripping a circuit
breaker.
■ Do not try to operate your air conditioner in Cooling mode
when outside temperature is below 65°F (18°C). The inside
evaporator coil will freeze up, and the air conditioner will not
operate properly.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
Display
During normal operation, display will show the current room
temperature. When the TEMP/TIME t and s buttons are
pressed, the unit will display the set temperature or delay time.
Selecting the Mode
The Mode button has three settings:
■ Cool
■ Dehumidify
■ Fan/Heat
Press the MODE button until the indicator light
above the desired setting is lit.
Cooling (COOL) Mode
In Cooling mode, the air conditioner cools air from the room and
vents hot air to the outdoors through the vent hose. Adjust fan
speed and the temperature setting to t your desired comfort
level. Temperature setting range is 61°F–90°F (16°C–32°C).
IMPORTANT: The vent hose must exhaust to the outdoors when
using Cooling mode.
Dehumidify (DEHUM) Mode
Air is dehumidied as it passes through the unit, without being in
full Cooling mode. The fan will operate at medium speed.
Fan speed is not adjustable in dehumidify mode.
IMPORTANT: The vent hose must exhaust to the outdoors when
using Dehumidify mode.
Fan/Heat (FAN/HEAT) Modes
Fan Mode
In this mode, the indicator will light green, and only the fan will
run. Air is circulated through the room with no cooling.
NOTE: The air conditioner does not need to be vented to the
outdoors in Fan mode.
Heat Mode
In this mode, the indicator will light red, and the air conditioner
will operate in a heating mode. When the air conditioner is
used in Heat mode, the temperature setting range is 61°F–77°F
(16°C–25°C). The heat mode will not operate above this range.
IMPORTANT: The vent hose must exhaust to the outdoors when
using heat mode.
Selecting the Fan Speed
The Fan Speed has 3 settings:
■ LOW
■ MED (Medium)
■ HIGH
Press the SPEED button until the indicator light
above the desired setting is lit.
Adjusting the Temperature
Press the TEMP/TIME s and t
buttons to adjust the set temperature
up or down in 1° increments.
Temperature setting range for Cooling
mode is 61°F–90°F (16°C–32°C).
After 10 seconds, the display will return to the current room
temperature. NOTE: Temperature may only be adjusted in
Cooling Mode and Fan/Heat mode.
When in TIMER mode, pressing the TEMP/TIME s and t
buttons will adjust the delay time for the air condtioner to shut off
or turn on.
Switching between Fahrenheit and Celsius:
Press both s and t buttons at the same time to toggle the
displayed units between °F and °C.
Appearance may vary.
95111_WHAP13HAW_portable.indb 8 5/25/16 4:42 PM
Loading ...
Loading ...
Loading ...