Loading ...
Loading ...
Loading ...
ENGLISH
10
Mounting on a wall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by
your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount
bracket on a solid wall perpendicular to the floor.
If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables.
When you do not use LG’s wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough
space to allow connectivity to external devices.
If you are using a non-adjustable mount, attach
the mount to the wall. Attach the cables to the TV
first, then attach the TV to the mount.
100 mm
(3.9 inches)
100 mm
100 mm
100 mm
100 mm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
24LH4830
24LJ4840
VESA (A x B)
A
B
75 x 75
Standard screw M4
Number of screws 4
Wall mount bracket
(optional)
RW120
CAUTION
Must use the enclosed screw in the box.
(Depending on model)
Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur.
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
Do not overtighten the screws as this may cause
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
Screw length from outer surface of back cover
should be under 8 mm (0.3 inches).
Wall mount Pad
Back Cover
Standard
screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
(0.3 inches)
NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
For more information, refer to the manual
supplied with the wall mount.
Loading ...
Loading ...
Loading ...