Loading ...
2
DRYER SAFETY
DRYER SAFETY ................................................................. 2
INSTALLATION REQUIREMENTS ..................................... 4
Tools and Parts .......................................................... 4
LOCATION REQUIREMENTS ............................................. 5
ELCTRICAL REQUIREMENTS – U.S.A. ONLY ..................... 6
ELECTRIC DRYER POWER HOOKUP – CANADA ONLY .... 7
GAS DRYER POWER HOOKUP – U.S.A. AND CANADA ... 7
INSTALL LEVELING LEGS.................................................. 9
MAKE ELECTRICAL CONNECTION – U.S.A. ONLY .......... 10
MAKE GAS CONNECTION – U.S.A. AND CANADA ........ 16
VENTING ........................................................................ 16
Venting Requirements ............................................... 16
Plan Vent System ......................................................17
Install Vent System .................................................... 18
CONNECT INLET HOSES ..................................................18
CONNECT VENT ............................................................ 20
LEVEL DRYER ................................................................. 20
COMPLETE INSTALLATION CHECKLIST ........................... 21
REVERSE DOOR SWING ................................................ 22
TROUBLESHOOTING ...................................................... 24
ASSISTANCE OR SERVICE ................................. Back Cover
TABLE OF CONTENTS
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, Part 1, CSA C22.1.
In the State of Massachusetts, the following installation instructions apply:
■ Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gas fitter qualified or licensed by
the State of Massachusetts.
■ Acceptable Shut-off Devices: Gas Cocks and Ball Valves installed for use shall be listed.
■ A flexible gas connector, when used, must not exceed 4 feet (121.9 cm).
INSTALLATION NOTES
Date of purchase: _________________________________
Date of installation: _______________________________
Installer: ________________________________________
Model number: ___________________________________
Serial number: ___________________________________
Loading ...
Loading ...
Loading ...