Loading ...
Loading ...
Loading ...
5
Refilling the water tank
When the red “tank empty” indicator light turns on, there is no more steam –
fig.9.
• Remove the water tank and pull horizontally. Fill it up without exceeding the MAX
level – fig.5.
• Replace it fully into its housing until there is a click – fig.6.
• When the green light stops flashing, the steam is ready.
Vertical steam ironing
• Set the iron temperature control slide and the steam output control dial
(located on the control panel) to the MAX position.
• Hang the garment on a coat hanger and hold the fabric slightly taut with one
hand.
As steam is very hot : never attempt to remove creases from a garment
while it is being worn, always hang garments on a coat hanger.
• Holding the iron in a vertical position, tilted slightly forwards, press repeatedly
on the steam control button (on the top of the iron handle) moving the iron
from top to bottom – fig.10.
Maintenance and cleaning
Cleaning your generator
• Do not use detergent or descaling products for cleaning the soleplate or the
base-unit.
• Never hold the iron or the base unit under the tap.
• Empty and rinse the removable water tank
• Regularly clean the soleplate with a damp, non-metallic washing up pad.
• Clean the plastic parts of the appliance occasionally with a soft cloth.
Recommendations : for
fabrics other than linen or
cotton, hold the iron a few
centimetres from the
garment to avoid burning
the fabric.
Before cleaning, ensure that
your steam generator is
unplugged and that the
soleplate and the iron rest
have cooled down.
To prime the steam circuit,
either before using the
iron for the first time, or if
you have not used the
steam function for a few
minutes, press the
steam control button
several times in a row,
holding the iron away from
your clothes. This will enable
any cold water to be ejected
from the steam circuit.
• Iron temperature control slide setting:
- Start with the fabrics to be ironed at a low temperature (•) and finish with those
which need higher temperatures (••• or Max).
- Mixed fibre fabric: set the ironing temperature to the setting for the most
delicate fabric.
- Woollen garments: press repeatedly on the steam control button to obtain short
bursts of steam, without placing the iron on the garment itself.
• Steam output control dial setting:
- Thick fabric: increase the steam setting.
- At a low temperature : set the steam output control dial to the low position.
Dry ironing
• Do not press the steam control button on top of the iron handle.
GB
021472-NOTICE PRO MINUTE AQUAPLUS 3/01/07 9:08 Page 5
Loading ...
Loading ...
Loading ...