Loading ...
2 Philips · PPX2055
EN
User Manual
1Overview
Dear Customer
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
General Safety Information
Do not make any changes or settings that are not
described in this user manual. Physical injury or damage
to the device or loss of data can result from improper
handling. Take note of all warning and safety notes indi-
cated.
Setting Up the Device
Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture. Do not place
the device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity
in the technical data.
The device must have sufficient vent
ilation and should
not be covered. Do not put your device in closed cabi-
nets or boxes.
In the event that the device becomes too hot, or if you
see smoke
coming from the device, you must immedi-
ately disconnect the device fr
om the USB socket. Have
your device examined by trained professionals at a tech-
nical service location. To prevent the spread of fire,
open
flames should be kept away from the device.
Do not plug in the device in humid rooms. Never touch
the
electrical cable or the electrical connection with
wet hands.
Under the following conditions, a layer of moisture can
appear
inside the device which can lead to malfunctions:
· if the device is moved from a co
ld to a warm area;
· after a cold room is heated;
· when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1 Seal this device in a plastic bag be
fore
moving it to
another room, in order for it to adapt to room con-
ditions.
2 Wait one to two hours before y
ou take the device
out of the plastic bag.
The product shall not be exposed to dripping
or splash-
i
ng and that no object with liquids, such as vases.
The device should not be used in a very dusty environ-
ment. Dust particles and other foreign objects may
damage the pro
duct.
Do not expose the device to ext
reme vibrations. It may
damage the internal components.
Do not allow children to handle the device without
supervision. The
packing materials should be kept out of
the hands of children.
The product should be supplied by a power system
compliant with LPS require
ments of 2.5 of UL60950-1.
Repairs
Do not make any repairs to the device yourself.
Improper maintenance can result in injuries or damage
to the device. Have your device repaired only by an
authorised service center.
Do not remove the type label from your device; this
wo
uld void the warranty.
DANGER!
Danger of Damage to the Eye by High
Power LED
This device is equipped with an high power
LED (Light Emitting Diode), which emits very
bright light. Do not stare directly into the pro-
jector lens to avoid eyes injury or irritations.
Top of the Device
‚ Focus setting
ƒ Mini-USB port
a
b
Bottom of the Device
‚ Recess for Tripod Adapter
a
Loading ...
Loading ...
Loading ...