Loading ...
Loading ...
Loading ...
Empava Gas Rangetops
6
Installaon Instrucons
Be
sure the range top is properly installed and grounded by a qualified technician. It is the
responsibility o he technician to make certain that your range top is properly installed. Situaons
cause by improper installaon are not covered under the warranty. Any expenses incurred due to such
situaons will not be paid by the manufacturer o he range top.
Leak tesng o he appliance shall be conducted according to the manufacturer’s instrucons, or
according to local building codes and gas regulaons in your area.
GAS CONNECTIONS (All Units)
NOTICE TO MASSACHUSETTS APPLIANCE DEALERS:
Be sure this documen s included in all gas range top appliances sold to consumers in the State of
Massachuses.
NOTICE:
Massachuses law requires the following:
• Appliances must be installed by a licensed plumber or gas fier.
• Appliances must be connected with a three (3) foot (36” maximum length) flexible gas connector
and
• A “T” handle type manual gas valve in the gas supply line to the appliance.
Have the dealer where you purchase your new range top install it or have them recommend a qualified
installer. Installaon must conform with local codes. In the absence ofl ocal codes, the installaon must
conform with the Naonal Fuel Gas Code, ANSI Z223.1-Latest Edion in the U.S.A. or the CAN/CGA
B149.1 or .2
Installaon Codes in Canada.
The range top should be connected to the supply line with 1/2-inch black iron pipe or a cerfied
flexible type stove connector. To prevent gas leaks, put an approved sealing compound which is
resistan o liquefied petroleum gases on all threaded connecons.
Important: Do not apply pressure directly to the range top manifold pipe when ghtening supply
connecons. The manifold pipe should be held securely a he pressure regulator to preven wisng.
Hold the pressure regulator with a wrench during the ghtening o he connecon, or the manifold
pipe may be twisted and split and cause a dangerous leak.
The installaon of range tops designed for manufactured (mobile) home installaon must conform
with the Manufactured Construcon and Safety, Title 24 CFR, Part
3280, [formerly the Federal standard for Mobile Home Construcon and Safety, Title 24, HUD (Part
280)] in the U.S.A. or C.S.A. Standard CAN/CGA Z240.4.2 in
Canada or, when such standards are not applicable, with local codes.
Loading ...
Loading ...
Loading ...