Loading ...
Loading ...
Loading ...
2. Take the connection hose completely out
of the compressor housing. Do not kink the
hose.
3. Attach the connection hose to the connec‐
tor of the sealing container, ensuring that it
engages audibly.
4. Slide the sealing container upright into the
holder on the compressor housing, ensur‐
ing that it engages audibly.
5. Screw the connection hose onto the tire
valve of the defective wheel.
6. With the compressor switched off, insert
the plug into a power socket inside the ve‐
hicle.
7. With operating readiness or drive readi‐
ness switched on, reel on the compressor.
Switch off the compressor after 10 mi‐
nutes
Do not allow the compressor to run longer than
10 minutes; otherwise, the device will overheat
and may be damaged.◀
Let the compressor run for approx. 3 to 8 mi‐
nutes to fill the tire with sealant and achieve a
tire inflation pressure of approx. 2.5 bar.
Seite 174
Mobility Wheels and tires
176
Online Edition for Part no. 01 40 2 962 953 – II/15
Loading ...
Loading ...
Loading ...