Loading ...
Loading ...
Loading ...
4
Using the processing bowl with the chopping
blade
1. Place the processing bowl on the non-slip
mat, ensuring the surface is clean and
level.
2. Fit the stainless steel chopping blade into
the processing bowl.
3. Place food into the processing bowl.
4. Attach the lid onto the processing bowl and
rotate the lid in a clockwise direction until
it locks into position.
5. Insert the motor housing into the
processing bowl lid and twist the wand in
a clockwise position until you hear a click.
See Figure 3.
6. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
7. Hold the bowl with one hand while
operating the power button with the other.
Select from speed 1 through to 9 (on
StickMaster
®
Platinum model) and depress
the power button (
) or turbo speed
button (
) at the top of the motor
housing.
Note: All stick blenders are designed to
operate only whilst the power buttons remain
depressed.
8. For an extra boost of power during
operation, the turbo speed button (
)
may be depressed.
Note: The power button (
) should be
released when selecting the turbo speed
button (
).
9. To stop the stick blender, take your finger
off the power button or turbo speed button.
10. To detach the motor body, twist the shaft
in an anti clockwise position until the
motor body unscrews from the processing
bowl. See Figure 4.
Using your processing bowl continued
Figure 3
Figure 4
Loading ...
Loading ...
Loading ...