Loading ...
Loading ...
Loading ...
4
Use of the remote control RC4334
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
Remark: in VGA mode only some buttons are valid.
* Manufactured under license from Dolby Laboratories.
‘Dolby’‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories.
INFO Display information
To display the channel number, the
name (if it exists), the time, the sound
mode and the time remaining on the
timer.
Press again to display the ratings
selected.The volume level and the
smart control adjustments are then
displayed each time they are used.
®ºÒ‡π†
Audio and Video equipment buttons.
TV / PC
Press one of these buttons to switch
the television between TV or PC
mode.
SURR Sound mode
Incredible surround
With stereo transmission, and when
Incredible surround is selected, it
seems as though the loudspeakers
are spread further apart from one
another.
Virtual Dolby Surround
Optimal with Dolby surround *
signals. Enables you to experience the
effect of Dolby Surround Pro Logic,
reproducing a rear sound effect. See
Sound menu, Dolby Virtual p. 2.
Note:You can make the same selection in
the Sound menu, Dolby Virtual, p. 2.
HD Press this button to use the
remote control directly in the HD
mode for HD devices (eg. Set Top
box).
Press 1x for
HD-A mode,
press 2x for
HD-D mode.
OK Press this button to display the
program list or to activate your
choice or to confirm when in the
menus.
MENU Main menu on/off. See p. 2.
CC Closed Caption
On/Off/On during mute
V To adjust the volume.
¬ Interrupt the sound or restore it.
P Channel selection
To browse through the TV channels
or sources stored.
0/9 Digit buttons
To select a TV channel.
For a two digit program number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit button
pressed a bit longer.
AV+ To select connected devices,
see p. 9.
-To type the digital seperator for
digital channels.
SLEEP TIMER
To select the length of time before
the set automatically turns off (from
15 to 240 minutes).
PIP When in VGA or HDMI Mode,
pressing the
PIP button will bring up
a smaller second window within your
main screen enabling you to watch a
TV channel and a picture from a
device connected to
AV3, at the
same time.
¬
+
-
V
+
-
P
VCR DVD TV SAT AMP
CCMENU
123
456
789
0
ACTIVE SLEEP
B
POWER
OK
®
®
®
®
AUTO AUTO
aM
Ò
®
‡π
º
†
INFO
TV PC
SURF
FORMAT
HD
SURR
SELECT
CONTROL
PIP
TIMER
SAP
-
AV+
VCR DVD TV SAT AMP
Press the SELECT button repeatedly
to select one of the system modes in
which the remote control can be
used. If no action is being undertaken
within 2 seconds, the remote control
returns to TV mode.After an action
in the selected system mode the
remote control will remain in this
mode for 60 seconds and will then
return to TV mode.
POWER B
Press to turn the TV on or off.
The TV is never powered off completely
unless it is physically unplugged.
2355.4 en 02-11-2004 14:19 Pagina 4
Loading ...
Loading ...
Loading ...