Loading ...
Loading ...
Loading ...
13
Storage
Beverage cans may differ in size and dimensions so the actual number of cans can be stored may vary. The 80-
can capacity is the approximate maximum when storing traditional 12 oz. cans and includes bulk storage.
You may load your beverage cans in single row or by stacking while taking note of the following: if you do not
have enough cans to fill your beverage refrigerator, it is better to distribute the load throughout the beverage
refrigerator so as to avoid “all on top” or “all below” type loads.
You can remove or relocate adjustable shelves to accommodate larger type of bottles (see removing
shelves)
Keep small gaps between the walls and the bottles to allow air circulation.
Do not over load your beverage refrigerator
Avoid obstructing the internal fans (located inside on the back panel of the beverage refrigerator).
Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the beverage refrigerator to tilt for-
ward if not properly installed.
REMOVING SHELVES
To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of
shelf is exactly under the plastic post and then lift it up and out.
In order to replace the shelf, repeat steps described above in reverse. And make sure to engage the
shelves with the small pegs of the extended rails when the model is equipped with roller system.
Loading ...
Loading ...
Loading ...