Loading ...
Loading ...
Loading ...
Use & Care Manual
ENGLISH
32
Replacing an Oven Light
The lights are switched on when the door is
opened or when the oven is in a cooking
cycle.
The oven lights are not illuminated during
SELF- CLEAN.
Each light assembly consists of a removable
lens, a light bulb as well as a light socket
housing that is xed in place. See gure on
this page.
Light bulb replacement is considered to be a
routine maintenance item.
To Replace a Light Bulb
1. Read WARNING on this page.
2. Turn o power at the main power supply (fuse
or breaker box).
3.
5. Remove the light bulb from its socket by
pulling it.
6. Replace the bulb with a new one. Avoid
touching the bulb with ngers, as oils from
hands can damage the bulb when it becomes
hot.
7. The bulb is halogen: use one with the same
type checking Voltage and Wattage.
8. Place the lens back on.
9.
Turn power back on at the main power supply (fuse or
breaker box).
WARNING
Make sure the oven and lights are cool and
power to the oven has been turned o before
replacing the light bulb(s). Failure to do so could
result in electrical shock or burns.
The lenses must be in place when using the
oven.
The lenses serve to protect the light bulb from
breaking.
The lenses are made of glass. Handle carefully
to avoid breakage. Broken glass could cause an
injury.
Each oven is equipped with three halogen lights
(per cavity) located in the lateral walls of the oven.
In ovens with lateral rack supports, remove
them by unscrewing the four screws.
Remove the lens between screw and glass
using a screw driver.
4.
Replace the rack supports if provided is
provided with the oven model.
A
A
A
Loading ...
Loading ...
Loading ...