Loading ...
Loading ...
Loading ...
11
Operation and Controls
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5
minutes before restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
SETTING THE TEMPERATURE CONTROL
During normal operation, the temperature display on the control panel shows the temperature inside the appli-
ance.
The unit has two separate temperature zones. The temperature range of the UPPER zone is between 41ºF
and 50ºF (5ºC and 10ºC) and the LOWER ZONE is between 50ºF and 72ºF (10ºC and 22ºC)
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The
preset temperature for the UPPER temperature zone is 43ºF (6ºC) and for LOWER temperature zone is 54ºF
(12ºC).
You can press the left side UP and DOWN keys to control the internal temperature of the UPPER temperature
zone and press the right side UP and DOWN keys to control the internal temperature of the LOWER tempera-
ture zone.
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will decrease
1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.
After the temperature has been set, the display will flash four times before it shows the current internal temper-
ature of the particular temperature zone.
To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash
in the display for 5 seconds. Then the display shows the current internal temperature
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous tem-
perature settings. When the power has restored, the temperature display will show the current cabinet tempera-
ture.
DOOR ALARM
If the door has been left open for more than 60 seconds, the alarm will sound. The alarm will stop by closing the
door.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. Pressing the
LIGHT key toggles between 2 modes of operation for the internal lights: Functional (default) mode and Showcase
mode. If you are in functional (default) mode, the lights will turn on only when the door is open. If you are in Show-
case mode, the lights will be on whether or not the door is open.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays, interi-
or light and audible alarms and prevents them from turning on again. Normal cooling operations will still take place.
To initiate Sabbath mode, press and hold the POWER and LIGHT keys at the same time for at least 5 seconds.
The indicator light will flash four times and confirm the Sabbath mode is ON. Sabbath mode can be exited by re-
peating the above process. The Sabbath Mode will automatically exit after 96 hours.
CABINET SHELVES
NOTE: Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air
circulation within the cabinet.
This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is
opened completely before pulling the shelves out.
Loading ...
Loading ...
Loading ...