Loading ...
Loading ...
Loading ...
34
Note
To force the machine to continue printing
after the LCD shows Replace Toner,
set the machine to Continue mode (Press
Menu, press a or b to choose 1.General
Setup and press OK, press a or b to
choose 4.Replace Toner, and press
OK, press a or b to choose Continue and
press OK). The machine will continue
printing until the LCD shows Toner
Ended. (For details about the Toner
settings, see Toner Settings in Chapter 1
of the Advanced User's Guide.)
Toner Ended A
Toner Ended
The machine stops printing until you replace
the toner cartridge with a new one. (See
Replacing the toner cartridge on page 34.)
Replacing the toner cartridge A
a Make sure that the machine is turned
on.
b Open the front cover and leave the
machine turned on for 10 minutes to
cool down.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover (back output tray) of the
machine, DO NOT touch the shaded parts
shown in the illustration. If you do this, you
may burn yourself.
Loading ...
Loading ...
Loading ...