Loading ...
Loading ...
Loading ...
ENGINE OIL DIPSTICK - 1.0L
ECOBOOST™
E141337
A
B
Minimum.A
Maximum.B
ENGINE OIL DIPSTICK - 2.0L
E169062
Minimum.A
Maximum.B
ENGINE OIL CHECK
WARNING
Do not work on a hot engine.
To check the engine oil level consistently
and accurately, do the following:
1. Make sure the parking brake is on. Make
sure the transmission is in park (P) or
neutral (N).
2. Run the engine until it reaches normal
operating temperature.
3. Make sure that your vehicle is on level
ground.
4. Switch the engine off and wait 15
minutes for the oil to drain into the oil
pan. Checking the engine oil level too
soon after you switch the engine off
may result in an inaccurate reading.
5. Open the hood. See Opening and
Closing the Hood (page 211).
6. Remove the dipstick and wipe it with
a clean, lint-free cloth. See Under
Hood Overview (page 213).
7. Replace the dipstick and remove it
again to check the oil level. See
Engine Oil Dipstick (page 215).
8. Make sure that the oil level is between
the maximum and minimum marks. If
the oil level is at the minimum mark,
add oil immediately. See Capacities
and Specifications (page 274).
9. If the oil level is correct, replace the
dipstick and make sure it is fully seated.
Note: Do not remove the dipstick when the
engine is running.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
Note: The oil consumption of new engines
reaches its normal level after approximately
3,000 mi (5,000 km).
Adding Engine Oil
WARNINGS
Do not add engine oil when the
engine is hot. Failure to follow this
instruction could result in personal
injury.
215
2018 Focus (CDH) Canada/United States of America, JM5J 19A321 AA enUSA, Edition date: 201706, Second Printing
Maintenance
Loading ...
Loading ...
Loading ...