Loading ...
Loading ...
Loading ...
Instructions for the User
23
There are two power plugs (POWER and SIGNAL) on the back of the minibar.
Connect the “POWER” plug to the room socket to be used for the Minibar (socket not connected to the
energy saving unit).
Connect the “SIGNAL” plug to any socket that is connected to the Energy Saver.
NOTE: The Minibar operates in NORMAL mode if the “SIGNAL” plug is not connected. This means that
its operation is not based on the presence of a guest in the room and is regulated by the temperature
chosen by the Customer through the selector described above.
WARNING!
If the POWER and SIGNAL cables are inverted, the Minibar will operate when the guest is in the room
and it will switch off when the guest is out of the room.
To make sure that the cables have been connected the right way round, make sure that the light inside
the minibar lights up when the minibar door is opened, after making sure that:
1) The Energy saver is not in operation i.e. that a smart card has not been inserted.
2) The Minibar is switched on (the temperature selector on the front of the minibar is not in the
“OFF” position)
If the light does not come on, invert the two power cables.
Warning!
If you switch the power off, do not turn it back on (reconnect the minibar to the power supply) for at
least 15 minutes. Otherwise, the compressor may stop for a few minutes before resuming normal
operation.
Loading ...
Loading ...
Loading ...