Loading ...
Loading ...
Loading ...
66 Servicing Your Honda
Engine Oil
8.Remove the old sealing washer (2) and
install a new sealing washer on the drain bolt.
9.Install the oil drain bolt and tighten to the
specified torque:
18 lbf·ft (24 N·m, 2.5 kgf·m)
10.
Pour the recommended oil into the
crankcase, approximately:
0.6 US qt (0.6 )
11.
Install the oil fill cap/dipstick securely.
12.
Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
13.
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page 64) until it reaches
the upper level mark. (Do not overfill.)
14.
Check for oil leaks.
20CRF50F31GJGA20.book66ページ２０１９年２月１３日 水曜日 午前１１時２６分
Loading ...
Loading ...
Loading ...